PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Predator won't communicate with car ECU!!!!

Thread Tools
 
Search this Thread
 
Old Mar 22, 2012 | 09:30 PM
  #1  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default Predator won't communicate with car ECU!!!!

I've had this Predator for about 2 years and never had a problem till now. I hooked the predator to the Diagnostics port and choose real time data. The predator tries to communicate then it says to much sure the car is in the ON position....but the car is running!! Anyone ever had this problem??
Reply
Old Mar 22, 2012 | 10:28 PM
  #2  
doublea87's Avatar
On The Tree
iTrader: (16)
 
Joined: Mar 2009
Posts: 153
Likes: 0
From: St. Louis, MO
Default

check your cig lighter fuse. should be a 10amp that supplies power to the DLC
Reply
Old Mar 23, 2012 | 08:16 AM
  #3  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

Fuse is good.
Reply
Old Mar 23, 2012 | 08:48 AM
  #4  
Mike@Diablosport's Avatar
LS1Tech Sponsor
15 Year Member
Photogenic
Liked
iTrader: (2)
 
Joined: Jan 2008
Posts: 2,295
Likes: 11
From: Central Florida
Default

Try options/troubleshooting/show VIN or show calid and see if it reports the correct info with the key on.
Reply
Old Mar 24, 2012 | 08:53 AM
  #5  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

Troubleshooting isn't under options. All it has is....pc communication...display serial number...set password...clear password...tool id...show current ticks....buy ticks...about tool....tool status....car tune and send software id
Reply
Old Mar 25, 2012 | 07:19 AM
  #6  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

Tttttt
Reply
Old Mar 25, 2012 | 02:16 PM
  #7  
06MonteSS's Avatar
LS1Tech Sponsor
20 Year Member
Photogenic
 
Joined: Dec 2005
Posts: 2,932
Likes: 12
From: CT
Default

thats an olllllld tool...

have you installed anything aftermarket since the last time you used the predator til now?

sounds like something is tapped into the ignition wires and the predator isn't able to detect that the key/ignition is on....
__________________
06MonteSS / DiabLew Tune

2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
Reply
Old Mar 25, 2012 | 05:34 PM
  #8  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

I had 2 cats and a cutout installed before this happened??? Does the predator need a update???
Reply
Old Mar 26, 2012 | 10:16 AM
  #9  
Mike@Diablosport's Avatar
LS1Tech Sponsor
15 Year Member
Photogenic
Liked
iTrader: (2)
 
Joined: Jan 2008
Posts: 2,295
Likes: 11
From: Central Florida
Default

Yeah, that is old....

Did they weld the cats in on the car?
Was the PCM disconnected before they started welding on it?
Reply
Old Mar 26, 2012 | 11:02 AM
  #10  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

Yes the cats was welded and the pcm wasn't disconnected..
Reply
Old Mar 27, 2012 | 10:15 AM
  #11  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

Ttttt
Reply
Old Mar 27, 2012 | 10:56 AM
  #12  
Mike@Diablosport's Avatar
LS1Tech Sponsor
15 Year Member
Photogenic
Liked
iTrader: (2)
 
Joined: Jan 2008
Posts: 2,295
Likes: 11
From: Central Florida
Default

Id suggest sending that tool in for a hardware upgrade.
For $99 + shipping, we'll gut it, rebuild it into a brand new Predator that is internet updatable, and has logging capabilities, and works just like a brand new tool.

Thats aside from the fact that there could be issues in the car due to the welding that was done, tough to say for sure without another tool that can try to communicate with the PCM.
Reply
Old Mar 27, 2012 | 01:38 PM
  #13  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

How do i go about getting that hardware update? What could have happened during welding to cause the predator not able to communicate with the car
Reply
Old Mar 28, 2012 | 09:13 AM
  #14  
boola1341's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: May 2007
Posts: 558
Likes: 0
From: Meherrin Va.
Default

Ttttt
Reply
Old Mar 28, 2012 | 11:54 AM
  #15  
06MonteSS's Avatar
LS1Tech Sponsor
20 Year Member
Photogenic
 
Joined: Dec 2005
Posts: 2,932
Likes: 12
From: CT
Default

did they wire up the electric cut-outs to the ignition wires? disconnect/pull the fuse for the electric cutouts, and see if the tool works...

info about the upgrade program:
http://diablosport.com/index.php?nam...wtopic&t=10946
__________________
06MonteSS / DiabLew Tune

2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
Reply




All times are GMT -5. The time now is 08:41 PM.