Pe commanded AFR help
Pe commanded AFR help I have my commanded AFR hi res on my display for the 1st time and have it commanded for 12.7/1 at around 62mph it drops to 11.7/1 what would cause the commanded AFR to change I thought in pe mode that was locked in I understand that if my ve table is off my afr could fluctuate but what I thought was the commanded should remain what you ask for I have hp tuner and am running this car at the track trying to dial it in and noticed this today
I always run COT off. Even when I had cats.
COT always seemed counter intuitive to me. The new LT1 motor is setup to inject fuel in on the exhaust stroke after start up to heat the cats faster but the COT protection adds fuel to lower their temps....
COT always seemed counter intuitive to me. The new LT1 motor is setup to inject fuel in on the exhaust stroke after start up to heat the cats faster but the COT protection adds fuel to lower their temps....
