HP Tuners is now accepting 98 pre-orders!
05-06-2004, 12:12 AM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
HP Tuners is now accepting 98 pre-orders! Read all about it here
If you have any questions, feel free to ask here or on our forum.
Thanks for your support!
If you have any questions, feel free to ask here or on our forum.
Thanks for your support!
05-06-2004, 09:38 AM
#2
Originally Posted by Magnus
Read all about it here
If you have any questions, feel free to ask here or on our forum.
Thanks for your support!
If you have any questions, feel free to ask here or on our forum.
Thanks for your support!
I sent you an email when I ordered my copy this morning. I was wanting you to verify that you were going to give us a year of free updates! I hope so. It has been a long time coming. Thanks for not forgetting about us!
I guess I just got my answer. Thanks!!!
05-06-2004, 09:50 AM
#3
Moderator
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
What are the differences in the software package between the 97/98 and the 99+?
Are the tables the same? If not what is different?
Can I monitor the same PIDs?
Thanks
John
Are the tables the same? If not what is different?
Can I monitor the same PIDs?
Thanks
John
05-06-2004, 02:11 PM
#5
TECH Senior Member
Originally Posted by JNorris
What are the differences in the software package between the 97/98 and the 99+?
Are the tables the same? If not what is different?
Can I monitor the same PIDs?
Thanks
John
Are the tables the same? If not what is different?
Can I monitor the same PIDs?
Thanks
John
from the HP Tuners board
http://www.hptuners.com/forum/YaBB.p...95;start=20#20
there are quite a number of differences:
- binaries are not segmented
- flashing routine is slightly different
- pinouts are different
- checksum routines are differnt
- more calibrations to manage (due to non segmented binaries)
- code structure is different
So seems the 97/98 PCMs are totally different internally
I think functionality is the same? Probably best to ask on the hp tuners board or email them ... they reply really fast
Trending Topics
05-06-2004, 09:49 PM
#8
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
We are not sure when we will be releasing 97 C5 product. It seems to be a very rare vehicle and from what I am told, 97 C5's can direct bolt in the 98 C5 PCM's.
We'll look into it further though and post updates on our forum as we have them.
We'll look into it further though and post updates on our forum as we have them.
05-07-2004, 07:28 AM
#9
Teching In
Join Date: Oct 2003
Location: Austin, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Magnus
We are not sure when we will be releasing 97 C5 product. It seems to be a very rare vehicle and from what I am told, 97 C5's can direct bolt in the 98 C5 PCM's.
We'll look into it further though and post updates on our forum as we have them.
We'll look into it further though and post updates on our forum as we have them.
Does that mean if I purchase a 98 C5 PCM It should work? With the proper tuning of course.
05-07-2004, 12:46 PM
#11
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
I cannot say for sure that if you stick a 98 PCM in your 97 C5 that you will be good to go. I have not tried this personally, only been told that it may work.
Sorry but we do not have trade-ins. Our product does have resale value though.
Sorry but we do not have trade-ins. Our product does have resale value though.
