Crank sensor problems
Thread Starter
On The Tree
Joined: Feb 2013
Posts: 125
Likes: 1
From: HAvelock NC
Crank sensor problems Having some trouble with my car not starting, it has 60 psi at the rails when trying to crank. I have no spark or injector pulse at all, and I have replaced the crank sensor and cam position sensor both, all wires to both check out good and all of my grounds are checking out good, is there anything at all that could cause this besides the crank sensor? I'm not throwing any codes, and I have no clue where else to go other than it possibly being the PCM itself, any help is appreciated
TECH Senior Member
Joined: Apr 2002
Posts: 6,080
Likes: 17
From: So.Cal.
Crank sensor problems Having some trouble with my car not starting, it has 60 psi at the rails when trying to crank. I have no spark or injector pulse at all, and I have replaced the crank sensor and cam position sensor both, all wires to both check out good and all of my grounds are checking out good, is there anything at all that could cause this besides the crank sensor? I'm not throwing any codes, and I have no clue where else to go other than it possibly being the PCM itself, any help is appreciated
Check crankshaft endplay.
