Inexpensive Opensource Flashing(Read is 100% working)
#861
Staging Lane
iTrader: (9)
I agree that I won't be able to use it. Now I need a good Bin file. Engine is a 4.8 with headers and an LS1 intake and throttle body. Pistons are flat top, so compression may be a little higher than stock. Not sure about the cam, but has trunions installed on the rockers. I am looking for a good starting point with an OS that has a detailed XDF available. Any suggestions?
#862
TECH Senior Member
ALL 4.8 pistons are flat top. They are used to gain compression in 5.3's using stock parts.
#863
TECH Fanatic
I agree that I won't be able to use it. Now I need a good Bin file. Engine is a 4.8 with headers and an LS1 intake and throttle body. Pistons are flat top, so compression may be a little higher than stock. Not sure about the cam, but has trunions installed on the rockers. I am looking for a good starting point with an OS that has a detailed XDF available. Any suggestions?
What transmission? I have several BINS here with richly featured XDF files for 5.3 L engines and 4L60E transmissions. A 4.8 L engine is tougher for me to assist you but perhaps not impossible.
Rick
#864
For the 1mb PCMs, 12587603.
For the 512kb PCMs, 12212156.
For the 512kb PCMs, 12212156.
#866
Staging Lane
iTrader: (9)
Next steps.
I have downloaded 12212156 and a working XDF file. I have a used 09354896. I will use PCM Hammer to upload and save the Bin that is on the PCM. I would like to defeat the security and test run the engine. The bin I downloaded is for a 2002 5.3 truck. The engine is a 4.8 with LS1 intake. I will use TunerPro to modify the Bin and write it back to the PCM with PCM Hammer. This will be the first time I am doing this. Any comments or warnings will be appreciated.
#867
Staging Lane
iTrader: (9)
I re-read the PCM and now PCM Hammer says it is good. In the last upload it showed as bad. Start End Stored Needed Verdict Segment Name
[04:33:56:596] 00000 7FFFD 2FD7 2FD7 Good Operating system
[04:33:56:612] 08002 12DFF B8A0 B8A0 Good Engine calibration
[04:33:56:612] 12E02 169FF 9B84 9B84 Good Engine diagnostics.
[04:33:56:612] 16A02 1B9FF 8806 8806 Good Transmission calibration
[04:33:56:627] 1BA02 1C2FF 59F3 59F3 Good Transmission diagnostics
[04:33:56:634] 1C302 1D07F 3146 3146 Good Fuel system
[04:33:56:634] 1D082 1D9FF A536 A536 Good System
[04:33:56:649] 1DA02 1DAFF 0CB0 0CB0 Good Speedometer
The OS number still comes out wrong in TunerPro. I guess I had a data error when I read it the first time. since the OS number is invalid, I remain unable to find an XDF file.
#869
#870
Staging Lane
iTrader: (9)
The OS number is the same in PCMHammer. 1273010 I found a reference to it on the HPTuners website So it is valid. I will try to read it with a friends HPTuner system. If anyone has an XDF that will work with this, it would solve my problem. Right now I am starting over with a .5.3 file and trying to get it working with 36lb injectors etc.
#874