How to LS3 DBW TB to LS6 pcm
Thread Starter
TECH Regular
Joined: Jul 2014
Posts: 471
Likes: 1
From: Near Autobahn
How to LS3 DBW TB to LS6 pcm Hey Guys!
As the title says, how can i let this happen?
Have bought incorrect gold blade LS3 TB nib which i will use on a Fast 102 LSX/R IM and combine with TB harness adapter from casper to my LS6 pcm, did this work?
I know about different readings, heard the one reads 0-5V up, the other the opposite way 5-0V but this can be changed in the pcm from the tuner on the dyno, correct?
Installed new LS3 TB on car with harness, it all works and opens full, but after 1sec.wot i got limp mode, engine power reduced and blade on TB fully closed abrupt, so there is something wrong, who knows the details here?
Thanks in advance,
Ron
As the title says, how can i let this happen?
Have bought incorrect gold blade LS3 TB nib which i will use on a Fast 102 LSX/R IM and combine with TB harness adapter from casper to my LS6 pcm, did this work?
I know about different readings, heard the one reads 0-5V up, the other the opposite way 5-0V but this can be changed in the pcm from the tuner on the dyno, correct?
Installed new LS3 TB on car with harness, it all works and opens full, but after 1sec.wot i got limp mode, engine power reduced and blade on TB fully closed abrupt, so there is something wrong, who knows the details here?
Thanks in advance,
Ron
Sorry man you'e sort of SOL on this one. Ls3 gold blade tb open in the opp direction older throttle bodies. That' why the car goes into limp mode there's no real way around this. You need an 05-07 SILVER BLADE throttle body to work with it. However ifbyou have a 102 manifold already I would skip all that and get a 102 tb really no reason not to. They tune just fine if you have a decent tuner
Thread Starter
TECH Regular
Joined: Jul 2014
Posts: 471
Likes: 1
From: Near Autobahn
Was on this way, but not willing to spend another 700 bucks for NW 102 TB dbw and maybe a 5hp gain here and then I need also bigger cai and maf card style reader so i end on 1 grand, isn't worth it here for the moment, thanks for ur opinion...
Regards
Ron
Regards
Ron
youre welcome for the help btw, since no one else here could give you an answer
Trending Topics
WARR Performance makes 102 TB's that are less than $150 and of good quality. They will need the correct IAC and TPS sensors for the the application. I've seen NW 102 for under $400 a few times.
Good luck
Good luck
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
