proper way to desensitize knock sensors
#1
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Aug 2004
Location: Rochester,Ny
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
proper way to desensitize knock sensors
I have hp tuners and a 2000 ws6 and on some wot runs i get about 4*kr and other times none.car is totally stock.My o2 are always 900-910mv at wot.cant think of anything but them being too sensitive and listening to the stock valvesprings and not real knock.what tables in hpt uners do i change and how.thanks for the help.
#3
TECH Senior Member
iTrader: (33)
im sure its prob not the problem, you gotta check the tune and see where the knock is comming from, i bet its just like another guys log i looked at, 4* of knock as soon as you floor it and then it decays down, you need to analyze the data first before you go making them less sensitive. mine would pick up 4* on 1st gear take off from wheel spin