Doesn't HP Tuners have a compare function?

Reply Subscribe

Thread Tools

Search this Thread

Jun 16, 2005 | 02:57 PM

1fastWS6

Thread Starter

8 Second Club

iTrader: (3)

Joined: Apr 2002

Posts: 1,461

Likes: 1

From: Missouri

Doesn't HP Tuners have a compare function?

Can't seem to locate it if it's in there. Want to see the difference in 2 timing tables. I can compare them side by side, but that's too much info to digest. Want to lay one over the other and have it show me the difference for each cell. I used to be able to do this in LS1 EDIT.

Thanks for the help!

Jun 16, 2005 | 03:00 PM

HumpinSS

FormerVendor

iTrader: (1)

Joined: Feb 2002

Posts: 3,059

Likes: 0

From: Waldorf, MD

Nope it does you will have to wait till 2.0

Jun 16, 2005 | 03:02 PM

1fastWS6

Thread Starter

8 Second Club

iTrader: (3)

Joined: Apr 2002

Posts: 1,461

Likes: 1

From: Missouri

<Homer Simpson voice> DOH!

Thanks HumpinSS.

Jun 16, 2005 | 03:08 PM

Bill's 02 Z-28 SS

TECH Enthusiast

Joined: Apr 2003

Posts: 561

Likes: 0

From: silver Spring MD

Hi Folks
Copy the tables into EXCEL and can do anything you want with the data including generating charts.
Bill

Jun 16, 2005 | 03:27 PM

Gary Z

10 Second Club

Joined: Nov 2002

Posts: 1,471

Likes: 3

From: Berkeley, California

What do you mean by "compare"? If you copy one and paste it over over the other, you will see the differences. So long as you don't save, you can continue to reload and paste, thus switching between the two.

Jun 16, 2005 | 03:36 PM

Black02SS

TECH Junkie

iTrader: (36)

Joined: Oct 2002

Posts: 3,291

Likes: 1

From: Kokomo, IN

When you finally get this feature to use Gary, you will know what we are talking about. The compare feature will tell you in a instant what is different between two different files and the fields that have been changed.

Jun 16, 2005 | 04:06 PM

1fastWS6

Thread Starter

8 Second Club

iTrader: (3)

Joined: Apr 2002

Posts: 1,461

Likes: 1

From: Missouri

Quote:

Originally Posted by Black02SS

Yeah. For instance....when you "compare" 2 timing tables in LS1 Edit, if the tables were both identical you would have a timing table showing ALL zero's indicating no differences in any cells. If there was 2 degress less in some cells, the cell would show a -2 or +2 and so on. Allows you to see the net difference in 2 tables at a glance. Its a VERY handy feature. The ONLY thing I miss right now about EDIT.