HP Tuner 2 bar + MAF, will it work for boost?
#21
9 Second Club
Join Date: Nov 2001
Location: Bay Area, CA
Posts: 1,445
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by soundengineer
well..a 2 bar map sensor that outputs the same total voltage that a 1 bar does would mean the VE table would be half resolution as 50 would now mean 100 and 100 would now mean 200.....
hows that for a start and an example
hows that for a start and an example
#22
8 Second Club
iTrader: (16)
Originally Posted by Nickn20
precisely right, you lose half your VE table to resolution loss, I have heard it doesnt affect much, which is really great news for boosted 98 cars! and yes 50kpa now = 100 kpa..... etc. great assessment. I think with a nasty cammed and boosted car you might run in to some trouble though, but if its that nasty it might be time for a FAST, BS3, AEM setup.....
usually you also have to change your OLFA table to reflect teh same changes because it has a MAP referenced data, and your PE tables all go to different #'s as well...
timing maps change....there are just a ton of tables that will be effected by a 2 bar MAP on a PCM that has a 1 bar data set