how to lean/richen and raise timing with Edit???
Thread Starter
Teching In
Joined: Jan 2002
Posts: 10
Likes: 0
From: waldorf
how to lean/richen and raise timing with Edit??? I was rich now I might be lean..I'll find out, but my timing is at 18 degrees average on a run. How can I raise that and richen/lean it out if I have to?
James
James
TECH Addict
Joined: Nov 2001
Posts: 2,207
Likes: 0
From: College Station, Tx
Re: how to lean/richen and raise timing with Edit??? Yep, it's included in the instructions - I would suggest giving them a good reading. Timing will be altered in the hi and low octane timing table.
You can not change part throttle air/fuel, though you can change your l-trims (using the MAF transfer function, etc.) - at WOT use the PE vs RPM table to change your a/f ratio.
Do a little reading and understand what you are doing before you make changes though.
Chris
You can not change part throttle air/fuel, though you can change your l-trims (using the MAF transfer function, etc.) - at WOT use the PE vs RPM table to change your a/f ratio.
Do a little reading and understand what you are doing before you make changes though.
Chris
