LS1M Anyone using it?
Thread Starter
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
Joined: Nov 2004
Posts: 16,083
Likes: 4
From: Justin, TX
LS1M Anyone using it? I just saw this on Ebay and have never seen/heard of it before.
http://cgi.ebay.com/ebaymotors/Palm-...00109269QQrdZ1
It is a Palm pilot platform tuner. It seems all well and good, but is it worth it? cheaper than a Power Programmer.
http://cgi.ebay.com/ebaymotors/Palm-...00109269QQrdZ1
It is a Palm pilot platform tuner. It seems all well and good, but is it worth it? cheaper than a Power Programmer.
Looks like it only scans, does not modify the
tune. More comparable to ATAP (which I think
might also run on Palm type rigs, it's the tune
file transfers that seem to need the CPU speed
for sustained high data rate with the tuning
tools).
tune. More comparable to ATAP (which I think
might also run on Palm type rigs, it's the tune
file transfers that seem to need the CPU speed
for sustained high data rate with the tuning
tools).
TECH Enthusiast
Joined: Feb 2003
Posts: 614
Likes: 0
From: Michigan (Holland/Grand Rapids)
I have been using LS1M for over 3 years now and I ahve been very happy with the product. It is only a scanner though and not a tuner in any way!
I have used it on my SS Camaro, SS Silverado, Avalance, wife's SS Camaro and GTP Grand Prix with good results during scanning/ reading trouble codes.
I like to keep it in my glove box so I am ready to help out fellow GM automobile owners with problems with their car. Back when I bought it I only paid $100 for it and got a $20 PALM from eBay so the investment was minimal, but I see the price has gone way up now so I would pass and put your money toward a tuner software IMO.
I still use the LS1M and Palm for quick scans and code reading but use EFILive Flashscan for my tuning software.
Greg
I have used it on my SS Camaro, SS Silverado, Avalance, wife's SS Camaro and GTP Grand Prix with good results during scanning/ reading trouble codes.
I like to keep it in my glove box so I am ready to help out fellow GM automobile owners with problems with their car. Back when I bought it I only paid $100 for it and got a $20 PALM from eBay so the investment was minimal, but I see the price has gone way up now so I would pass and put your money toward a tuner software IMO.
I still use the LS1M and Palm for quick scans and code reading but use EFILive Flashscan for my tuning software.
Greg
Teching In
Joined: Dec 2005
Posts: 18
Likes: 0
Originally Posted by orangeapeel
It just looked pretty handy. and portable.
I use it because, unlike some other scanners, this one actually shows you knock retard information.
I also use it at the track, I will record my runs and go home and pull it down into a spread sheet. It's pretty cool because I can tell Excel to make graphs showing where the KR hits during my runs (usually top of 2nd gear near the end of the track). I can graph in the engine temps or whatever else against that data. Pretty nice.
I have ordered a new higher-end OBD scanner, if the new one does at least the same stuff (KR and other stuff) I will be selling my LS1M (with the palm) pretty cheaply (probably on Ebay). PM me if interested, or keep an eye on the for sale section here.
