anybody know what causes a low voltage at the TPS?
#1
TECH Veteran
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It is at a constant .65 @ idle. But for some reason it changes and sets the P0121 code. anybody know what causes this? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
#2
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Check the 5V reference voltage that supplies
the TPS, make sure it's good. Other than
that, I'd expect it's either some mechanical
overtravel on closing, electrical noise (like
ground integrity) or a dirty /worn TPS potentiometer giving an occasional zero output
and getting captured.
the TPS, make sure it's good. Other than
that, I'd expect it's either some mechanical
overtravel on closing, electrical noise (like
ground integrity) or a dirty /worn TPS potentiometer giving an occasional zero output
and getting captured.