Still getting misfire codes
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Still getting misfire codes 01 Z28 M6 with ported Heads,TR224 Cam,and SLP longtubes.
Every once in a while it will throw out the p300 code.I'm getting slight misfires from all cylinders.
On Edit I raised the idle to 850rpm and set the low idle misfire test to 32000.
Any other tricks I can do?How about adding a couple deg. of timing in the idle?
P.S My own 01 TA has the same exact setup and tune but never has thrown a code.
Thanks
Every once in a while it will throw out the p300 code.I'm getting slight misfires from all cylinders.
On Edit I raised the idle to 850rpm and set the low idle misfire test to 32000.
Any other tricks I can do?How about adding a couple deg. of timing in the idle?
P.S My own 01 TA has the same exact setup and tune but never has thrown a code.
Thanks
Re: Still getting misfire codes I think taking out some base advance might
be a better bet for smoothing out idle.
At low speed with a big overlap cam, it
needs time to make up its mind whether
it's coming or going.
be a better bet for smoothing out idle.
At low speed with a big overlap cam, it
needs time to make up its mind whether
it's coming or going.
