PID's working, but AFR Error not?
#1
On The Tree
Thread Starter
Join Date: Sep 2004
Location: edgewater, fl
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
PID's working, but AFR Error not?
I finely got my LM-1 working through my egr using a custom PID, but now i cant get my AFR Error PID to work, my formula for my Wibe band is ([PID.2811]/.5)+10 and my formula for my AFR Error is 100*((([PID.2811]/.5)+10)-[SENS.121])/[SENS.121], y is my WB working but not my AFR Error?
#3
LS1TECH Sponsor
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
AFR Error is already defined in HP Tuners.
Just create a user defined PID that takes your EGR Input and convert it to an AFR value and just assign it the sensor of AFR and now everything in the scanner works perfectly.
This is the beauty of our sensor system.
- Keith, HP Tuners
Just create a user defined PID that takes your EGR Input and convert it to an AFR value and just assign it the sensor of AFR and now everything in the scanner works perfectly.
This is the beauty of our sensor system.
- Keith, HP Tuners