BS3 won't start looking for help.
Jeff
my car did start and run on 360 and the first engine (ls1) took 363 to be perfect
then when i got the ls2 it started fine too but took 345 to be correct
i would double check the map adaptor wire and whatever you did for the ls2 cam signal.. i believe that the ls2 cam wire orientation is different than ls1 but plugs in the same... i forget that too.
if you would like a second opinion on the file you could send me your hardware specs and the file and i could look at it too.
oo, how about firing order? verify that
I already checked the fireing order in conparison to the base file that BS sends and they are the same you know it off the top of your head I'll recheck it. I'll double check the jumper harness on the map although would it seems to be reading about right when cranking. Check that crank signal wire on the stock pcm for me I hear you on gettig it running, but I will still need to know. I'd be glad to go over it over the phone later as I don't have internet access where I am working on the car etc... (713)302-0737 after 6:00 pm CST. That is if you have time, but I am sure it is good enough to run. Thanks David. Kurt has been helping me a bunch also.
Trending Topics
The Best V8 Stories One Small Block at Time






