help with my set up 402 stroker
On nitrous it only picked up 65 horse on the dyno. The car weights 3650 with me in it. It is pretty much full suspension car. It only has a racetronics fuel pump in it and it seems to drop fuel pressure to about 52 psi why am I losing fuel pressure do I need a inline pump to hold pressure? Why is it not making power it should make any suggestions? do I need better exhoust? tune seems good it drives on the street great. a/f is at 12.9 and total timing is 26 and 6 degrees pulled on nitrous.
Any help would be great
Thanks pete
The TH-400 & 9" Ford likely eats even more then that (could be closed to 30%), but if we take that figure of 25.3%, its making 540 HP at the crank. That seems pretty good, to me anyway.
If the tuner dialed in the AFR and timing based on maximum recorded HP/TQ (I have seen LSx style motors make *more* power richer then 12.9 in some cases), and there's no "knock retard", it sounds like the tune is good.
If the motor is pretty new, it may "loosen" up with a few more miles.
Sounds like an awesome engine build - I'd like to put one of those in my Z28. ;-)

Trending Topics
The Best V8 Stories One Small Block at Time


