Anyone Wanna Share Their Maf Calibration Tables For A 5 Wire 85mm Maf In A F-body

I Have A Set Of Values And Im Gonna Be Re-calibrating My Maf Here Soon; But Id Like To Take A Look At What Other's Are Using Just For My Sanity

 

Dam!...........

 

On your car we used the truck ("ZL1" so called) table but I found
the Z06 table better after the cam swap. However if you have any
errors like high fuel pressure etc., the result may still not come out
right. I'd get a fuel pressure reading at WOT and make sure you
have IFR table tweaked up for actual / rating pressure on whatever
injectors you have.

 

Isnt There A Fuel Pressure Regulator From The Factory?

My Ifr's Are Based On 58psi So Im Hopeing This Is Accurate.. I Know With My Racetronix Setup I Should Be Good As Even Before The Kit I Had Good Fuel Pressure

With My Current Maf Table I Command 12.2 But I Get 12.8@4000rpms And It Just Rises To 13.5@6800rpms

SOON AS I GET THIS EGR\WIDEBAND FIGURED OUT IM JUST GONNA MAKE A NEW MAF CALIBRATION BUT I INDA WANT TO LOOK AT OTHER CURVES JUST FOR MY SANITY

 

Wouldent Using The Z-06 Tabel Vs The Z-71 Tabel Lean Out The Car Even More? (it Shows Less G\sec)

For My App... I Was Thinking Of Sometyhing Like The Holden Monaro Tabel

BTW COOL FILE

 

you will have to go over the MAF table with a wideband regardless of what you use for a base file, so it doesn't really matter which one you start with

 

Yep

 

I Know, I Was Just Looking For A Comparison File..