P0102 Mass Airflow circuit,Low Input
#1
Staging Lane
Thread Starter
Join Date: May 2007
Location: St. Clair Shores MI
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I hooked up my scanner and thats what it showed. Does that mean the MAF sensor is bad? Any help would great thanks.
#3
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not necessarily. First thing I'd check is the ENG SEN fuse for an open. If it's blown or blows again after replacing it check for things on the same circuit, MAF/H02S/skip shift and reverse lockout solenoids all on the same fuse.
#4
Staging Lane
Thread Starter
Join Date: May 2007
Location: St. Clair Shores MI
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dont know whats going on with my car. but it kept blowing the eng sens fuse and I had my car tuned by Vector Motor sports now its acting as if it went back to factory tune I just dont understand it...........