Need Help With Security
#1
10 Second Club
Thread Starter
iTrader: (12)
Join Date: Oct 2006
Location: Alabama
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Need Help With Security
Ok I did some searching and didnt find anything with the same set-up i got. My VATS has been deleted from my PCM with HP Tuners. But when i get in my car sometimes and try to start it, the security light pops up and stays on for 3 mins untill i can start it. It has gotten to the point now to where it is every other time i get in it......
#3
TECH Senior Member
Not familiar with HPT but VATS is in the BCM too, thinking HPT settings only apply to fuel shut off portion? If the security light is coming on VATS isn't completely deleted. Someone correct me if I'm wrong.
#6
10 Second Club
Thread Starter
iTrader: (12)
Join Date: Oct 2006
Location: Alabama
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Alright guys/gals. This is what i just did to fix mine. All i did was take the starter ignition relay out and jumped it with a wire. Cranked right up without a problem. The security light flashed while the car is running though.
Trending Topics
#16
Launching!
Join Date: Nov 2005
Location: birmngham, al
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
i wasnt thinking right when i wired in the resistors. instead of making them a complete circuit together, i was just making 2 parallels. my dumbass mistake there.