blackbyrd

iTrader: (14)

Drove it around the neighborhood yesterday, make sure everything was road ready.

Drove it to work today hopefully she makes it home

Blu06R1

Between Sunday and Yesterday:

1. Attempted to replace OPSU without removing Intake - Snapped new ACDelco unit in half at the plastic/metal

2. Replaced rear main, and rear housing seals with the help of 4" PVC cap for alignment duty.

3. Installed new pilot bearing (required a LOT of coaxing)

4. Installed New Tick Master Cylinder (Cursed like a sailor with this one)

5. Installed New slave cylinder and speed-bleeder on transmission

6. Installed LW Flywheel and Monster LT1-S twin disc clutch assembly

7. Re-installed bellhousing with four 1.5" vents that were cut into it.

8. Got transmission back up with x-member

Over the next week, hope to finish buttoning up torque arm/driveshaft/exhaust and then pull intake for the "correct" way to replace the OPSU.

YellowTA1

iTrader: (10)

going to put the new alternator on so I can be up and running again, got a 145-amp one, I heard they are better than the 102-amp alternators that come factory.....

EXTINCT95

Changed the oil. Replaced the driver side headlight gear. Began replacing the driver side window regulator/motor assembly.

Kevin Lee 487

iTrader: (1)

Make sure you got a bigger belt too. The stock one won't fit with the bigger alternator.

99WS6MAN

iTrader: (2)

Replaced Hurst Shifter stick to a shorter one

WS6 #3392

Installed my new JAAM.. Easy install, looks good, will see if it works as good as my old BGRA did at the track.

bleepster

iTrader: (2)

Got the interior washed - conditioned the leather, washed the outside.
AC compressor took a dump, had to by-pass the AC for now until I can afford a new one. thank goodness I live in MI where AC is really not needed. also, had an extra set of valve covers that i cleaned and painted. will throw on the car later in the year when I get the time.
Excuse my messy garage

Bird Lightning 2.0

^^^ how about a pic of the Bird on your hood?

bleepster

iTrader: (2)

here ya go

WS6 #3392

Here is a picture of mine.

Blasius02

Installed new floor mats

WS6 #3392

Where did you get those at? I have been wanting some like that.

WS6 #3392

Never mind I just saw your other post. LOL

blackbyrd

iTrader: (14)

took this when I drove it to work the other day

The "Problem Child"

low_bowtie83

Did my racing stripes, 30th anniversary and WS6 emblems, anodized my wheels, and interior panels sooo much work.....lol

Bird Lightning 2.0

If your going for the 30th Anniversary look. You should get the center caps for your wheels. I've seen them on eBay.

s_desantis

filled it up with gas 😆

low_bowtie83

agreed in the process just costs lots of $$$ the cheapest price ive seen is around 300 or so

michaelhawk

I removing all of that stuff this week! Just finished up today.