Ordered my Exhaust today!!!! and my SLP lid will be here thursday. cant wait to instal all of this and have some fun! =D

 

Using the guide found here, www.firebirdnation.com/pdf/doorpanel.pdf, I replaced a broken window stabilizer in my passenger door. The hardest part was reinstalling the lock cover and the phillips screw set deep in the armrest. Oh yeah, fishing out the broken end took a couple minutes also. Took me about 45 minutes from start to finish and I have never taken a door panel off before. Not too shabby, I think. The attached photo are the old stabilizers. No sense in just replacing the broken one when there are 2 of them in each door.

 

found out my brake lines have a leak
I was suppose to go on a date with a hot chic this weekend.
Gotta take the Cavalier. Cavalier = No Fun.
Well if she ends up liking me its for my personality

 

^lol, make sure you have some pics of it so she knows youre not a scrub

 

Had my a/c charged. It works great. Whew.

 

Went to the local dealership to have some extra keys V.I.N. cut ....but they were closed :-(

 

Got my PCM back from Frost today, replaced the O2 on bank to and took it for a ride in between the rain storms. Tomorrow morning is a road trip for work. Cant wait to run it through the gears and chirp some tires!

 

Got myself a lifetime alignment from firestone and got it completely aligned.

 

Checked the tire pressure, got my t top shades on, spent three hours cleaning the driver side if the car almost done getting the TA to my standards of nice and clean. Have about 7-10 more hours of work and she can hit the streets

 

Fixed my headlights (stripped gears) , painted the headlight bezels, and cleaned my wheels up!

 

How much does a lifetime cost?

 

Opened the garage door and started to rain, closed the door and drove the truck instead... We'll try again later!

 

New headers came in

 

Put another 200 miles on it today and getting ready to wash it to go hang out with the other screaming chickens tonight!

 

Picked it up from RPM!

http://img215.imageshack.us/img215/1572/img004rk.jpg

 

Pulled the fuel rail and intake off to plug in the KS that came unplugged when reinstalling the intake last week. All is good now! Cleaned up the inside and thinking about washing it up and giving it a wax!

 

well saturday evening and all sunday and into moday till 5am me and slohawk780 changed my 853 heads for 243 heads on and installed a raptr cam kit and some misc small stuff. should be tuned.

found a bent pushrod on the passenger side and a new pushrod and valve spring. weird

 

installed my cutout, put new motor mounts on, replaced the AC belt and replaced the belt tensioner, recharged the ac, bought new rubber all the way around, and my LS6 intake came in today!!

 

Won at Top 5 Best In Class Award today!

 

beautiful!