Smokin deal on 3.91 gears
#1
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: Wichita, KS
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Smokin deal on 3.91 gears
Ok guys, I've been talking about this for over a year now.
I've been working with Motive Gear on getting a line of gears and it has finally happened.
3.91 gears for $399.
http://www.shop.gforce1320.com/produ...2&categoryId=7
Major install kits for $145.
http://www.shop.gforce1320.com/produ...6&categoryId=7
That's $544. for gears and major install kit. That is cheaper then what it used to cost for gears alone!
These prices are not guaranteed to stay this low for long.
We have teamed up with SNL Performance in Texas to also distribute these gears since they have a full install shop with dyno service (and are the best in the west if you ask me).
Just give the guys at SNL a call @ 817-750-2000 www.snlperformance.com if you want to buy through them at the same price.
Thanks
Chris
I've been working with Motive Gear on getting a line of gears and it has finally happened.
3.91 gears for $399.
http://www.shop.gforce1320.com/produ...2&categoryId=7
Major install kits for $145.
http://www.shop.gforce1320.com/produ...6&categoryId=7
That's $544. for gears and major install kit. That is cheaper then what it used to cost for gears alone!
These prices are not guaranteed to stay this low for long.
We have teamed up with SNL Performance in Texas to also distribute these gears since they have a full install shop with dyno service (and are the best in the west if you ask me).
Just give the guys at SNL a call @ 817-750-2000 www.snlperformance.com if you want to buy through them at the same price.
Thanks
Chris
Last edited by Gforce Engineering; 07-15-2010 at 03:53 PM.
#4
TECH Resident
Join Date: Apr 2009
Location: Wouldnt believe me if i told you
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Few questions.
Will this create "diff noise" from the rear?
How hard is install, and about how long does it take?
And what kind of an improvement will a M6 header and tune car gain from these? I know that when i raced an A4 with gears off a roll i freight trained him at anything over a 40 roll, will this be the case with an M6?
Will this create "diff noise" from the rear?
How hard is install, and about how long does it take?
And what kind of an improvement will a M6 header and tune car gain from these? I know that when i raced an A4 with gears off a roll i freight trained him at anything over a 40 roll, will this be the case with an M6?