04 Gto Cai
Trending Topics
#8
I had a K&N CAI before. I had some troubles with it touching the P/S pully. As well as the tube would get pretty warm, and the IAT sensor was in the area of the heat. So my IAT's were pretty warm.
Went back to a stock airbox and a drop in K&N. I made alot of power with it on the dyno with some nice bolt ons and a cam. But my IAT's were 135* standing still. I could only get them back down to 100* or so driving.
I have now swapped all that for an LPE CAI. The induction tube seams to resist the heat a little better than the stock and K&N tube. The IAT sensor is now located in the air filter inside the "CAI box". Temps are much lower, and I haven't gotten to the dyno to see improvements yet. But I would gather a few ponies were picked up. Of corse, I can't tell due to the new heads and intake added to the mix.
Went back to a stock airbox and a drop in K&N. I made alot of power with it on the dyno with some nice bolt ons and a cam. But my IAT's were 135* standing still. I could only get them back down to 100* or so driving.
I have now swapped all that for an LPE CAI. The induction tube seams to resist the heat a little better than the stock and K&N tube. The IAT sensor is now located in the air filter inside the "CAI box". Temps are much lower, and I haven't gotten to the dyno to see improvements yet. But I would gather a few ponies were picked up. Of corse, I can't tell due to the new heads and intake added to the mix.
#9
TECH Enthusiast
iTrader: (10)
Join Date: May 2006
Location: phx , az
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
ive got the speed inc , hate it , ive got a nice 3" spot of paint that the filter has rubbed off the inner fender , and it pulls in heat from the headers
im getting the CAI inc box , so i can try and close the area around the filter off so its only breathing fresh air
im getting the CAI inc box , so i can try and close the area around the filter off so its only breathing fresh air
#15
Launching!
Join Date: Feb 2005
Location: Savannah, Ga
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
I have the K&N CAI and besides it looking great, getting better gas mileage, and making the engine a little louder I don't it did much for performance. Maybe a little better throttle response but I think CAI are more responsive on FI motors.
#18
Registered User
Join Date: Mar 2008
Location: New JerSeY!!!
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
sorry to post this guys but i stillnew to the forums and the abbreviations.. but whats a iat?
and yea i bought the k/n and i hate it very much and i woudl go with the enclosed intake also.. drop in k/n was a little better but fully enclosed the best...
and yea i bought the k/n and i hate it very much and i woudl go with the enclosed intake also.. drop in k/n was a little better but fully enclosed the best...