KrautBurner

iTrader: (5)

I said a "Good" kit
including a window switch, FPSS, heater, lines, ect....

I'm a big fan of making sure you have the safety gear




btw,
a tune is probably the best bang for your buck you can do (HP/$$$)

PapaSmurf2005

They are easier to launch and more consistent.

massillongoat

iTrader: (3)

**** that's a steal...is stainless just for looks?
I"M think of running spintechs

massillongoat

iTrader: (3)

damn that's a steal for sure....does stainless actually do anything or is just for looks?

PapaSmurf2005

No rusting.

b15nut

I was a lil off on the price, it appears they are $425.

Here is the quote from gunnar at patriot from another thread:

LS2tiger

Use the parts for sale section here and on LS1GTO.com. Port and polish your own throttle body. Two hole mod in the air intake. Descreen the maf,Coolant crossover. JBA catless mids on stock manifolds,remove the resonator and replace it with a H-pipe. Theres tons of stuff just do some searches in the engine sections.

b15nut

Depending on where you live is the kicker. If you live somewhere warm and it doesnt hardly rain or snow then the coated pacesetters will last as long as you own the car if not longer. They would still last a long time in any climate as long as the coating stays doesnt flake. There have not been any issues with pacesetters since they came out with Version 2.

They fit great and we have not had any issues with ours.

I live in PHX, AZ and we have installed 6 sets in the last 5 weeks on local cars.

Other header brands are stainless and you will have no issues with them. I recommended the Pacesetters since you sounded like you were on a budget. I think you can pick up noncoated SW (stainless steel) for around 800. Just call around for better prices than what is posted on the sites.

massillongoat

iTrader: (3)

not really on a budget just looking for the most bang for my buck when I dig into it next winter prolly looking to spend about 4 gs or so

KrautBurner

iTrader: (5)

$4G's as in $4K

you can get heads, cam, fast intake manifold, and injectors (installed) for that

you can almost get a Magnacharger for that

Headers, Cam, and tune for about that too !!!!!
(that's what I would do)

oh wait,
that's prettymuch what I did

KrautBurner

iTrader: (5)

Headers $1000
Cam + spring kit + pushrods + install $1200
Tune $400
Nitrous Plate kit $800

install on headers and nitrous

you're at about $4K

that's prettymuch my setup

massillongoat

iTrader: (3)

yeah I don't think I"m gonna do nitrous....mine will prolly be alot cheaper though I can still all of it myself hehe....I"m gonna do ls6 heads to...if I do heads headers cam catback maf throttle body and cold air....whatcha think I"ll run?

Sicko

iTrader: (1)

Birds go "cheep".

I think these people mean "Cheap".

Pacesetter LTs are the best bang for the buck for are car.

massillongoat

iTrader: (3)

yeah??? I found some on texas-speed.com for like 275 that's just for the headers though

b15nut

For the same headers with catless midpipes at the other place I mentioned (not a sponsor here so dont know if I can say their name) I got mine for 410 shipped. Coated about 130.00 more. I dont think that price can be beat for the PS headers.

massillongoat

iTrader: (3)

yeah that's a good price....send me a pm with that site again

b15nut

pm sent with link.