weak points
#21
TECH Fanatic
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Change the stock front radius rod bushings, rear spings, add drag bags, and get a good four wheel alignment.
That is my only problems with the stock suspension. I am also going to add one BMR stub to see if it helps with wheel hop. Some guys on the LS2gto apparently had good results with that, but I wouldn't be suprised if it doesn't fix anything.
That is my only problems with the stock suspension. I am also going to add one BMR stub to see if it helps with wheel hop. Some guys on the LS2gto apparently had good results with that, but I wouldn't be suprised if it doesn't fix anything.
#22
12 Second Club
iTrader: (3)
Join Date: Apr 2004
Location: Grand Rapids, Michigan
Posts: 1,512
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Change the stock front radius rod bushings, rear spings, add drag bags, and get a good four wheel alignment.
That is my only problems with the stock suspension. I am also going to add one BMR stub to see if it helps with wheel hop. Some guys on the LS2gto apparently had good results with that, but I wouldn't be suprised if it doesn't fix anything.
That is my only problems with the stock suspension. I am also going to add one BMR stub to see if it helps with wheel hop. Some guys on the LS2gto apparently had good results with that, but I wouldn't be suprised if it doesn't fix anything.
#23
9 Second Club
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The weakest points with an 04 is the stubs and half shafts. The outer axle shaft is smaller in the 04's, they corrected it in the 05-06's. The 04 used some goofy outer cv joints too.
The stubs are the same throughout the years but still a weak spot.
I run cryo treated factory stubs and have been 9.70 with a 1.43 60ft time on them.
Come visit me on ls1gto.com about half shafts. I'm a sponsor over there.
The stubs are the same throughout the years but still a weak spot.
I run cryo treated factory stubs and have been 9.70 with a 1.43 60ft time on them.
Come visit me on ls1gto.com about half shafts. I'm a sponsor over there.