anyone had build Fuel Cell??
07-24-2007, 11:58 PM
#1
anyone had build Fuel Cell?? I have been trouble figure out to start make build for Fuel Cell 25 gallons Enduro Fuel Cell on rear under trunk of my 2001 Camaro for OpenRoadracing or general Road Race ?
I plan use the Steel Square Tube Hot Rolled
1 X 1 X 11 GA (.120 wall).
Look at pix:
Which best way build mount to hold fuel cell?
OR
I plan use the Steel Square Tube Hot Rolled
1 X 1 X 11 GA (.120 wall).
Look at pix:Which best way build mount to hold fuel cell?
OR
Last edited by Jeff Smith; 07-25-2007 at 04:24 AM. Reason: add PIX
07-26-2007, 09:14 PM
#5
I see what your trying to do it looks similar to what we run in our truck 3 1x1 square tube cradles with a 22 guage sheet metal... If you plan on road racing the car 25 gallons at over 6 lbs a gallon of fuel past the real axle might make it loose with a full fuel load I have heard of people running 2 smaller cells for that reason
07-27-2007, 02:14 AM
#6
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Safe makes a cell for the 3rd gens. It should fit into a 4th gen considering they are pretty much the same in the back. Would save a lot of fabrication work.
