21* trickflow heads
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Of all the CNC'd 21deg heads we've sold, I don't know that any have finished sorting out their builds to the extent that they've begun to run on track and work on getting the car sorted out. Even then, that is likely only a few guys since most will never go run the car beyond dyno testing. They certainly have the potential to be made into something worth running over a well done stock casting. 
Its a 355 with speedpro forged pistons and scat ibeam rods. Has a le 234/238 cam, ported intake, 30lb injectors, 58mm tb, and full boltons. performabuilt 4l60 3800 stall and 9in ford rear with 3.70 gears.
Of all the CNC'd 21deg heads we've sold, I don't know that any have finished sorting out their builds to the extent that they've begun to run on track and work on getting the car sorted out. Even then, that is likely only a few guys since most will never go run the car beyond dyno testing. They certainly have the potential to be made into something worth running over a well done stock casting.
Ill let you know mine when my ***** all together.. I have almost the exact same motor as you, but my cam is the 232/240 .592/.592 112 and its going on a 6speed with the stock rear for now.
I've got an out of the box set on a 355ci with all the air a T trim can provide.
I've been fighting the car the last few months and put away for the winter.
Should be fun when it is sorted out.
For being sold out and hard to get there doesn't seem to be many that have them on here.
I've been fighting the car the last few months and put away for the winter.
Should be fun when it is sorted out.
For being sold out and hard to get there doesn't seem to be many that have them on here.
Of all the CNC'd 21deg heads we've sold, I don't know that any have finished sorting out their builds to the extent that they've begun to run on track and work on getting the car sorted out. Even then, that is likely only a few guys since most will never go run the car beyond dyno testing. They certainly have the potential to be made into something worth running over a well done stock casting.
Of all the CNC'd 21deg heads we've sold, I don't know that any have finished sorting out their builds to the extent that they've begun to run on track and work on getting the car sorted out. Even then, that is likely only a few guys since most will never go run the car beyond dyno testing. They certainly have the potential to be made into something worth running over a well done stock casting.
