When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a slightly used Holley Ultra HP 850 E85 carb for sale. Less than 50 miles on it off my ls1 383 Camaro. It was too big for my setup so I went with a smaller carb. This was $860 new. Im asking $500 firm local to phoenix. $540 shipped. text for more info and pics. 915-269-7058
I don't know how to click and drag the thread over here, but go to classifieds and pull up "cams, intake, etc.". Selling 2 cams, GMPP dual plane, and some other misc stuff. Thanks!
Selling a very lightly used GMPP Dual Plane LS3 carb intake. Very nice shape, very clean and unmodified. The GMPP intake is definitely the nicest of the available LS3 dual plane intakes on the market. Pricey, yes, but definitely very cool. These are over 500.00 new on Summit!
GMPP LS3 Dual Plane $375.00 + Shipping OBO
Edelbrock LS3 Victor Jr. in the pictures is now SOLD!
-Currently set up with New Manley nextek springs set up for .675-.700 lift hydraulic roller cam with titianium retainers
-New k motion k900 springs set up for .700 lift solid roller cam with Chrome moly retainer
-Used Psi max life springs setup for .750 lift with chromemoly retainers
Jesel j2k Mohawk beam adjustable shaft rocker system 1.7 ratio
Gm performance tall valve covers. Clearanced to clear the shaft rockers.
Mast Motorsports 2 piece single plane intake 4500 Port matched to heads. This is a efi intake, I currently have the injector holes plugged for a carbureted application. These can be removed. Comes with matching mast Motorsports fuel rails to convert it back to efi.
All must be sold together everything is made to fit this particular combination. I have tons of time and money in getting all these components to fit and match properly. All of this will be sold together.
This combination in a 3150 lb Camaro on radials 440ci and .750 lift nitrous cam has Been 5.14 @ 136mph in the 1/8 on a 350 shot of nitrous. This setup has a ton of potential.
$3,000 picked up will ship
Call or text James
317-752-7406
M
Last edited by speedtigger; 01-25-2017 at 01:36 PM.
gen 3 guys, i had some valley covers/knock sensor deletes made up with my logo on it. These are $60/each shipped to USA addresses and will include stainless flush mounting hardware
Price is shipped, this camshaft was spec'd by none other than theeee Martin Smallwood. Dubbed "The Malicious Mullet", the idle quality was requested to be "the baddest bitch in the trailer park". It helped hurl 3030lbs of carbed 6.0/t56 down the quarter mile at 137 mph in just under 10 seconds. 242/252 .615"/.615" 108+5. SOLD!
Last edited by thirdgenbum; 03-23-2017 at 07:28 AM.