TexasVortexx

iTrader: (31)

I Like mine low

BOLO

iTrader: (40)

Bad *** looking LT1! Especially with that hood.

badfbodyz

iTrader: (3)

Yes I went with Strano/Koni setup all around with the rear hose mod

1_slow00z28

Has anyone had to raise they're car back up to fit a 28x10.50. My car is lowered right now and i am having some issues being very close to the back bumper

TexasVortexx

iTrader: (31)

The tires will certainly fit but if you are talking about a half inch clearance between the slick and the bottom of the rear bumper the you should get adjustable lower control arms if you haven't done so already. Then you can center the rearend equal distances from the front side fender and the rear bumper. Remember too your slicks will grow taller on the big end at speed so I wouldn't want any less than a 1/2 inch clearance on either side.

1_slow00z28

I ended up trimming the rear bumper of the car a tad because I wanted more clearance that what was there thanks

dsadsdaiouser

1_slow00z28

badfbodyz

iTrader: (3)

So many clean rides in here

Jtm2085

iTrader: (1)

Shitty picture, but you get the idea.

badfbodyz

iTrader: (3)

TexasVortexx

iTrader: (31)

Oh that's nice. Is your rear narrowed a bit?

badfbodyz

iTrader: (3)

None. 15x10 7.5" backspace

BOLO

iTrader: (40)

^^Thats the best 15" wheel offset I have ever seen on a stock width rear end. It does look as if it has a narrowed rear end. Nice looking fire chicken btw.

badfbodyz

iTrader: (3)

^ low pad rts FTW

BOLO

iTrader: (40)

Here's mine

455GTO

iTrader: (18)

Groesbeck

On the strip at Royal Purple in Houston, Texas

badfbodyz

iTrader: (3)

Nice looking ride

6spdg37s

iTrader: (1)

setup for now. spring wil do skinnies to match

front is lowered on 275# qa1 single adjustable coils