I Like mine low

 

Bad *** looking LT1! Especially with that hood.

 

Yes I went with Strano/Koni setup all around with the rear hose mod

 

Has anyone had to raise they're car back up to fit a 28x10.50. My car is lowered right now and i am having some issues being very close to the back bumper

 

The tires will certainly fit but if you are talking about a half inch clearance between the slick and the bottom of the rear bumper the you should get adjustable lower control arms if you haven't done so already. Then you can center the rearend equal distances from the front side fender and the rear bumper. Remember too your slicks will grow taller on the big end at speed so I wouldn't want any less than a 1/2 inch clearance on either side.

 

I ended up trimming the rear bumper of the car a tad because I wanted more clearance that what was there thanks

 

 

 

So many clean rides in here

 

Shitty picture, but you get the idea.

 

 

Oh that's nice. Is your rear narrowed a bit?

 

None. 15x10 7.5" backspace

 

^^Thats the best 15" wheel offset I have ever seen on a stock width rear end. It does look as if it has a narrowed rear end. Nice looking fire chicken btw.

 

^ low pad rts FTW

 

Here's mine

 

 

On the strip at Royal Purple in Houston, Texas

 

Nice looking ride

 

setup for now. spring wil do skinnies to match

front is lowered on 275# qa1 single adjustable coils