They may fit better because its being hand fitted to the exact car instead of a generic kit made on a jig when it can vary car to car. We would need Bob to chime in on who makes the FMIC itself though.

 

They used to offer diff intercoolers from Chiseled Perf but think that has since changed a while back. HOB is right next door basically so im sure they help also.

 

So I busted out my Z28 invoice folder I keep very hidden from my wife for obvious reasons

This was all the way back from 8-1-2005 so pricing has gone up but you'll get the point.

Procharger kit from SD concepts (SDCE) $4,765 (4.5" twin cooler kit)
Upgrade to big red race bypass $190
Crank pin kit $90
SDCE upgrade 8 rib spring tensioner kit $575
Ati super damper non A/C $330
Mototron #60 injectors $415
Lonnies double pumper dual in tank fuel pumps $575
Aeroforce OBD2 scan gauge $250
Dyno tune $450

Total $7415

 

fng ouch. Is the damper needed?

 

For the 8 rib blower belt... Yes

 

So what all is needed then if you wanted a F1A-94 to put down 1000 hp in an auto?

 

http://shop.brutespeed.com/ATI-1TE10...-Speed-Kit.htm





You will need to come up with your own air inlet as the F-1A-94 has the larger 4.0" inlet like the F-1C and F-1R do. This kit will give you everything except for the fuel system and tune. Bob

 

Thanks Bob, I actually just sent you an email before I saw this.

 

Also forgot to add my Snow Methanol kit was $325. Not necessary to run a Procharger but well worth the $$$ in my opinion.

 

Thanks, I appreciate it!! Bob

 

A whole crap load of nickels!!!

 

You will need to rob fort Knox, as well as win the powerball.