Recommend a site sponsor for stall purchase
Thread Starter
Teching In
Joined: Sep 2017
Posts: 10
Likes: 0
Recommend a site sponsor for stall purchase I'm looking for a 3600 stall or similar for my 02 camaro with a 4l60e trans. Can you recommend a site sponsor to purchase from? I'm looking at a yank ss3600 or similar from fti, precision, etc.
When I was looking to get a Yank(Dave) or CircleD(Chris),I had to deal with them directly. They(both) build a convertor when it's ordered. In the time pondering a decision,Yank had put on a sale and that's when I ordered.
Trending Topics
Shameless plug: MY VOTES FOR FTI!
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Fanatic
Joined: Jun 2003
Posts: 1,869
Likes: 99
Yank PY3400 here hooked to Performabuilt Level 3 behind Procharged D1SC HC,LTs etc stock short block 98 Camaro Z28 - 565 rwhp.
Went from 3.73 to 3.42 to 3.23 rear end gears. Drives the best now of the three with 3.23's . Cruises at 75 mph almost like stock. That said I don't street race or drag race - just wanted good street manners and driveability.
Found night and day difference between my current Yank PY 3400 TQ and Precision Industries 3600 stall TQ. Precision was very loose in city driving compared to the Yank.
Driving it now with current setup reminds me of my stock 95 Z28 and the way it shifted in city traffic - very solid compared to my 98 when it was still stock.
Went from 3.73 to 3.42 to 3.23 rear end gears. Drives the best now of the three with 3.23's . Cruises at 75 mph almost like stock. That said I don't street race or drag race - just wanted good street manners and driveability.
Found night and day difference between my current Yank PY 3400 TQ and Precision Industries 3600 stall TQ. Precision was very loose in city driving compared to the Yank.
Driving it now with current setup reminds me of my stock 95 Z28 and the way it shifted in city traffic - very solid compared to my 98 when it was still stock.
Thread Starter
Teching In
Joined: Sep 2017
Posts: 10
Likes: 0
Is there a big difference between the yank ss(or similar converter) which is a 9.5 inch converter and a 11 inch converter like a circle d or fti performance wise? I will likely never do nitrous. I don't want to spend $800 if I can be just as pleased spending $500 ya know? But I don't want to do this again for a while. Looking for bang for my buck here.
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Is there a big difference between the yank ss(or similar converter) which is a 9.5 inch converter and a 11 inch converter like a circle d or fti performance wise? I will likely never do nitrous. I don't want to spend $800 if I can be just as pleased spending $500 ya know? But I don't want to do this again for a while. Looking for bang for my buck here.
We have had Great service and results for our customers with FTI converters , I am sure others here are excellent also but FTI we have had lots of experience with,
__________________
Billet front cover has a couple of advantages, for one the lockup clutch apply surface is much larger. Thats important because remember you are going down in converter physical size which make the clutch smaller if it has a stock front. They are probably a smidge heavier due to more material there but Id also like to think they are stronger overall. Both should perform WOT very similarly.
OP since you are looking for a 3600rpm converter you would have to go with our 9.5" as the highest we go is 3200 on our 11" converter. Im sure many members can attest in here that the money is better off spent now on the right converter vs the wrong one now and more later on for the right one.
here is some info to help differentiate the 2.
11 Street Brawler series: rated to 450HP(no power adders), 3200 highest stall, 90 day warranty, no 1 year free restall
Billet 9.5" SRL Series: rated to 750HP(for a single clutch), 2400-4400 RPM capable, 3 year warranty, custom designed to each car, 1 year free restall, available in a triple clutch
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
We do offer a RACER discount for forum members. My name is Dalton just call and ask for me.
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet