broken gears
Thread Starter
Staging Lane
Joined: Feb 2005
Posts: 53
Likes: 0
From: Baltimore
broken gears i had a set of richmond 410 gears in the stock 10bolt and i broke like 4 or 5 teeth of the ring last week. i called 2 shops 2 get an estimate on how much it would be to clean out the rear of the metal and to put a set of 410s back in and i am getting a ballpark of $1100..is this price high? should i spend this money on the stock rear or just put a 12bolt in because in the near future i have a feeling the 10bolt is gonna give out on me. i live in the baltimore area so if anyone has a suugestion on a shop thet could refer 2 me it would be appreciated.
i would go wiyh the 12 bolt and not worrie any more about it. i just installed mine this weekend. bob at exotic performance plus has the whole set up for $2350. that is with the 33 spline axels and abs.
Originally Posted by mike2244
i would go wiyh the 12 bolt and not worrie any more about it. i just installed mine this weekend. bob at exotic performance plus has the whole set up for $2350. that is with the 33 spline axels and abs.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
How many miles did you have on the 4.10's and who put them in for you? Investing $1100 in a 10 bolt... yeah, not only is that rediculous but thats half the price of a 12 bolt / 9 inch.
That price is absurd. Shouldn't cost more than $400, if that.
No it is not something you can do in your garage if you are not familiar with the way it works. Pinion depth, backlash etc are incredibly vital.
No it is not something you can do in your garage if you are not familiar with the way it works. Pinion depth, backlash etc are incredibly vital.
Thread Starter
Staging Lane
Joined: Feb 2005
Posts: 53
Likes: 0
From: Baltimore
thanks 4 the advice guys..i am getting fbody central here in baltimore to clean out my rear and put gears in it 4 now 4 a quick fix for $200. but a strange 12bolt or ford 9' will be on the way.
