FS: Madman TA, BMR LCA's, HAL QA1's, etc....
Thread Starter
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
FS: Madman TA, BMR LCA's, HAL QA1's, etc.... I'm starting to part my car out and have some good suspension up for sale. I could really use some of the stock parts to go back on my car if possible, but that isn't a deal breaker if you want to keep that stuff for yourself. Here's what I have:
MADMAN TORQUE ARM off my Moser 12-bolt, this thing is the best of the best IMO, it's used of course but still in good condition: $450 shipped
FRONT AND REAR HAL QA1'S WITH FRONT HAL SPRINGS, these are the front coilovers w/ springs and rear shocks, all 4 are all 12-way adjustable and I guess are known as the "F" series for their single rate, I also have the spanner wrench somewhere I can throw in but that thing is garbage, I used it one time and never again, it's all used but in good condition: $500 shipped for the whole set SOLD
BMR CHROMOLY ADJUSTABLE POLY/POLY LOWER CONTROL ARMS, these are red with the center adjustable section, used in good condition: $150 shipped SOLD
BMR CHROMOLY ADJUSTABLE POLY/POLY PANHARD ROD, this is red to match the LCA's with the center adjustable section, used but in good condition also: $130 shipped SOLD
MADMAN TORQUE ARM off my Moser 12-bolt, this thing is the best of the best IMO, it's used of course but still in good condition: $450 shipped
FRONT AND REAR HAL QA1'S WITH FRONT HAL SPRINGS, these are the front coilovers w/ springs and rear shocks, all 4 are all 12-way adjustable and I guess are known as the "F" series for their single rate, I also have the spanner wrench somewhere I can throw in but that thing is garbage, I used it one time and never again, it's all used but in good condition: $500 shipped for the whole set SOLD
BMR CHROMOLY ADJUSTABLE POLY/POLY LOWER CONTROL ARMS, these are red with the center adjustable section, used in good condition: $150 shipped SOLD
BMR CHROMOLY ADJUSTABLE POLY/POLY PANHARD ROD, this is red to match the LCA's with the center adjustable section, used but in good condition also: $130 shipped SOLD
Last edited by B18B1LS1; Sep 27, 2006 at 10:18 AM.
Thread Starter
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
I'm not sure what the "Outlaw" is? Is there more the one version of his t/a now? It does come with the crossmember and everything you need to do some serious 60's!!!
Thread Starter
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
I just looked at the t/a Thunder has on their site, it looks and sounds the same in the description, so I'm going to say yes, it's the Outlaw torque arm he sells.
Trending Topics
Thread Starter
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
I don't have any pics on my computer right now. But I didn't weld mine, I welded tabs onto my subframe connectors so I could simply bolt the cross brace on. It makes getting to stuff much easier not having a welded on crossbrace and driveshaft loop!
