Great numbers guys! 
408cid ALL MOTOR Corvette=601 RWHP
Thread Starter
8 Sec Tuner
iTrader: (2)
Joined: Jan 2002
Posts: 4,641
Likes: 0
From: Wish I was in a boat fishing...
408cid ALL MOTOR Corvette=601 RWHP This is a car we just finished yesterday.
2000 C5 Corvette
408 LS1 11.4.1 Compression HK Racing Engines
Greg Good Stage MEGA HP LS6 Heads 2.10 Valves
Custom Solid Roller Camshaft (Specs per Greg Good) around 250/260
Jessel J2k Rockers
Greg Good Ported FAST 90mm
Kooks 1 7/8 to 2" Headers
3" X-pipe
Textraila Exo Skel Dual Disc Clutch
Six Speeds Inc Stage 3 T-56 ( You da man Joe!)
DTE Stage 3 4.10 Rear End
19" HRE Wheels
MAFless Tune
This dyno is through open x-pipe. Through a B&B Triflow Catback it makes 578 RWHP!
601 RWHP 513 RWTQ SAE
2000 C5 Corvette
408 LS1 11.4.1 Compression HK Racing Engines
Greg Good Stage MEGA HP LS6 Heads 2.10 Valves
Custom Solid Roller Camshaft (Specs per Greg Good) around 250/260
Jessel J2k Rockers
Greg Good Ported FAST 90mm
Kooks 1 7/8 to 2" Headers
3" X-pipe
Textraila Exo Skel Dual Disc Clutch
Six Speeds Inc Stage 3 T-56 ( You da man Joe!)
DTE Stage 3 4.10 Rear End
19" HRE Wheels
MAFless Tune
This dyno is through open x-pipe. Through a B&B Triflow Catback it makes 578 RWHP!
601 RWHP 513 RWTQ SAE
Curious why someone would put a solid roller 600 rwhp motor in a vette with a stick and 18" wheels. Does that thing even hook at a 50mph roll?
Great numbers though.
Great numbers though.
Last edited by 98Z28CobraKiller; Jan 10, 2008 at 02:23 PM.
Proves my point about not needing aftermarket castings to make big power.
I am surprised at lest 10 people haven't said that it would have made more power with (insert brand xxx) heads...
I am surprised at lest 10 people haven't said that it would have made more power with (insert brand xxx) heads...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
8 Sec Tuner
iTrader: (2)
Joined: Jan 2002
Posts: 4,641
Likes: 0
From: Wish I was in a boat fishing...
Awesome #'s BTW !!!
That's great considering our pretty much full race 40X 15-1 motor made 780 hp@8200 N/A.
Awesome street car stuff, now you need some rims/tires and a trip to the drag strip with some videos for us to see
Awesome street car stuff, now you need some rims/tires and a trip to the drag strip with some videos for us to see
Another badass Greg/HKE combination with the help of you guys!
Thread Starter
8 Sec Tuner
iTrader: (2)
Joined: Jan 2002
Posts: 4,641
Likes: 0
From: Wish I was in a boat fishing...
If anything, a 19 would be better than other wheels since you can get a huge width on them...Not to mention how expensive the tires will be...Aside from a pimp ride, those are some sweet results...Must be nice when you can blow doors off other rides even if they are using a 150+ shot...If you can, post up some vids of the ride...
Kev