Darton sleeved ls1 block, ls6 intake, 228r camshaft, injectors, tb,
Darton sleeved ls1 block, ls6 intake, 228r camshaft, injectors, tb, Category: Engine - Intake/Fuel
Price: $750
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): TN
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Darton sleeved (I was told dry sleeve and machine shop also said dry) 4.100 inch bore ls1 block with great cylinder walls that still have near perfect cross hatch. The only bad thing about the block is when I put the main caps on and ran my fingers around the main bore my fingernail hits a lip (no main bolts). My machine shop said these bores will have no problem going to 4.125 if desired but now they are 4.100. I would ASSUME that a line bore is needed but I am not 100 percent positive. I had originally ordered a rotating assembly for a 427 stroker but texas speed took too long so I cancelled my order and ordered a used ls7. I can have pictures tomorrow.( I BOUGHT THIS BLOCK TO BUILD, I NEVER RAN IT BUT WAS TOLD THE SLEEVES DID NOT HAVE MANY MILES. FROM LOOKING AT THEM I WOULD AGREE)
750 PLUS SHIPPING OR PICKED UP. There is no lowballing that is my bottom dollar.
Accel 30 lb injectors used (RATED AT LT1 FUEL PRESSURE SO ON OUR CARS IS A 36lb OR 38 LB INJECTOR). All worked fine on my car before being removed, 100 dollars plus shipping
Ls6 intake with 80K on it. Will not include bolts. 300 plus shipping
ls6 throttle body from corvette drive by wire 100 dollars
NEW 228R CAM FROM TSP HAVE RECEIPT FROM 2 MONTHS AGO. I only turned the motor over, was never fired and I was one tooth off so it bent some intake valves. Never ran only installed and turned over...Paid 410. 320 shipped. Cannot remove until Thursday because I work 12 hour shifts and am not off until then. Everything else is off already.
Trending Topics
http://www.popularhotrodding.com/eng...ls1/index.html
Article of the company that sleeved the block.
I have pictures in an email now and can forward it. Just post your email
Article of the company that sleeved the block.
I have pictures in an email now and can forward it. Just post your email
TECH Apprentice
Joined: Jun 2009
Posts: 318
Likes: 5
From: Oklahoma
simpson.homer719@gmail.com
I'm interested in the block and any information on, also other parts you have concerning the block, and any documents you have pertaining to the block.
I'm interested in the block and any information on, also other parts you have concerning the block, and any documents you have pertaining to the block.
Camshaft still for sale. No money received yet. I am not waiting anymore for funds. First to paypal 310 shipped for this cam gets it. Motor never saw fuel or spark! I have receipt from TSP for those interested.