Meziere Electric Pump, Sheet metal Valve Covers, New Jesel Sportsman Rockers!
Meziere Electric Pump, Sheet metal Valve Covers, New Jesel Sportsman Rockers! Meziere Electric Water Pump black, low hours. I purchased from a local guy who went to a full race setup. Includes a harness with a solenoid. This won't fit my new C6 
$400 Shipped, obo.
Fabricated Sheet metal valve covers from Aaron@ Intake Elbows. 2" Tall to clear all the high zoot rockers, comes with stand offs and has the profiler oil cap installed. Setup for remote coils (no coil brackets). $300 shipped, obo.
New (Never run) Jesel Sportsman Rockers. These are Jesel shaft mount rockers, they are adjustable by using Jesel supplied Shims for setting rocker arm height. These rockers have been clearanced for big springs and the rocker stands have been ground on to get them to fit on my ET heads (which they never ended up fitting anyway). I am missing two bolts (one to hold the rocker stand down and one of the rocker attachment bolts and two shims). These parts should only be a couple of bucks from Jesel. The bolts could be replaced with quality grade 8 fasteners from a hardware store (nothing particulary special about them), the shims I would get from Jesel though.
These will fit any LS1, LS2, LS6, LM7, LQ4, LQ9 etc heads. They may also work on some aftermarket castings, They will not work on either the RHS or ET heads without some signifigant fab work.
No matter what I will be taking a bath on these, but lets say $350 shipped.
Pics available upon request. send PM. Paypal preferred but will also do money order (shipped upon receipt) Also shipping to lower 48, Canuckistan will be significantly more.
The only trade I would be interested in would be for a Coffman 800 pipe and water injection for my Sea Doo. (I need it for my HX swap). Anything else, no thanks.
$400 Shipped, obo. Fabricated Sheet metal valve covers from Aaron@ Intake Elbows. 2" Tall to clear all the high zoot rockers, comes with stand offs and has the profiler oil cap installed. Setup for remote coils (no coil brackets). $300 shipped, obo.
New (Never run) Jesel Sportsman Rockers. These are Jesel shaft mount rockers, they are adjustable by using Jesel supplied Shims for setting rocker arm height. These rockers have been clearanced for big springs and the rocker stands have been ground on to get them to fit on my ET heads (which they never ended up fitting anyway). I am missing two bolts (one to hold the rocker stand down and one of the rocker attachment bolts and two shims). These parts should only be a couple of bucks from Jesel. The bolts could be replaced with quality grade 8 fasteners from a hardware store (nothing particulary special about them), the shims I would get from Jesel though.
These will fit any LS1, LS2, LS6, LM7, LQ4, LQ9 etc heads. They may also work on some aftermarket castings, They will not work on either the RHS or ET heads without some signifigant fab work.
No matter what I will be taking a bath on these, but lets say $350 shipped.
Pics available upon request. send PM. Paypal preferred but will also do money order (shipped upon receipt) Also shipping to lower 48, Canuckistan will be significantly more.
The only trade I would be interested in would be for a Coffman 800 pipe and water injection for my Sea Doo. (I need it for my HX swap). Anything else, no thanks.
Last edited by 96 Comp T/A; May 21, 2007 at 09:13 PM.
the meziere is for an LS1 correct?...ifso ill take it.can you send me a pic?
crader_2000@charter.net
crader_2000@charter.net
Trending Topics
On The Tree
Joined: Jun 2005
Posts: 111
Likes: 0
Originally Posted by smok'nZ
pics of the pump to spangler911@hotmail.com
You dont need no electric water pump for that turd.
