Piston & rod trouble
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Piston & rod trouble
I'm getting some wiseco or diamond forged stock bore flat top pistons, which ones would you recommend me? I am thinking on getting some scat rods, will I have any trouble with the scat rods and any of these pistons? Scat has 6.098 or 6.125 so the lenght will not be trouble, but im worried more about the pin or ring issues, hope you can help me, thanks
#2
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
I'm getting some wiseco or diamond forged stock bore flat top pistons, which ones would you recommend me? I am thinking on getting some scat rods, will I have any trouble with the scat rods and any of these pistons? Scat has 6.098 or 6.125 so the lenght will not be trouble, but im worried more about the pin or ring issues, hope you can help me, thanks
#4
Teching In
Scat rods do not have the correct offset for an LS, they use the same blank as they do for the SB Chevy. We've been trying to talk sense into them for about a decade.
That is the main reason I recommend Molnar.
That is the main reason I recommend Molnar.
Last edited by Mark O'Neal; 05-23-2024 at 07:46 PM.
#5
TECH Senior Member
You replied to a 2007 thread...
The following 3 users liked this post by RB04Av: