BNIB TEA 5.3 1.5 heads for sale
Thread Starter
Joined: Aug 2003
Posts: 136
Likes: 1
From: Beautiful downtown Texas
BNIB TEA 5.3 1.5 heads for sale Brand new, never installed. $1300 plus shipping, paypal okay but only if it doesn't cost me 3%.
From TEA's website:
Flow Data
LS1 5.3 Stage 1.5
Lift Intake Exhaust
0.1 67 53.7
0.2 140 122
0.3 203.5 172
0.4 250.6 218.2
0.5 288.9 244.4
0.55 302.9 254.7
0.6 313.7 260.5
CNC Port LS1 5.3 Head to Stage 1.5
3.900” Combustion Chamber
Competition Multi-Angle Valve Job
Blend Valve Job
Mill Heads to Customer Specs
Flow Intake and Exhaust Ports
Heads Cleaned, Set Spring Heights, Assemble, Seat Pressure, Installed Height, and Coil Bind
Ferrea 2.020 Intake Valve
Stock LS1 1.550 Exhaust Valve (REV 1.57” Exhaust Valves are also available)
Standard TEA .650" Lift Dual Spring” (Comp 1.250” 921 and Comp 1.440” 978 are also available)
TEA Titanium Retainer
TEA Locators
GM Locks
GM Intake and Exhaust Valve Seals
5.3 Liter
$1499.00
Including new GM castings
From TEA's website:
Flow Data
LS1 5.3 Stage 1.5
Lift Intake Exhaust
0.1 67 53.7
0.2 140 122
0.3 203.5 172
0.4 250.6 218.2
0.5 288.9 244.4
0.55 302.9 254.7
0.6 313.7 260.5
CNC Port LS1 5.3 Head to Stage 1.5
3.900” Combustion Chamber
Competition Multi-Angle Valve Job
Blend Valve Job
Mill Heads to Customer Specs
Flow Intake and Exhaust Ports
Heads Cleaned, Set Spring Heights, Assemble, Seat Pressure, Installed Height, and Coil Bind
Ferrea 2.020 Intake Valve
Stock LS1 1.550 Exhaust Valve (REV 1.57” Exhaust Valves are also available)
Standard TEA .650" Lift Dual Spring” (Comp 1.250” 921 and Comp 1.440” 978 are also available)
TEA Titanium Retainer
TEA Locators
GM Locks
GM Intake and Exhaust Valve Seals
5.3 Liter
$1499.00
Including new GM castings
Thread Starter
Joined: Aug 2003
Posts: 136
Likes: 1
From: Beautiful downtown Texas
Stock LS1 1.550 Exhaust Valve (REV 1.57” Exhaust Valves are also available)
Same as the LS1 heads......these will yield higher compression without milling, and have great port velocity making them a great street head.
Same as the LS1 heads......these will yield higher compression without milling, and have great port velocity making them a great street head.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
Joined: Aug 2003
Posts: 136
Likes: 1
From: Beautiful downtown Texas
If I get my asking price I'll throw in some stock MLS gaskets.....
