T/AWS6969

I am taking my old SBC apart and needed the fuel pump block off plate for the other engine. After taking that plate off, out came the rod. I put this together years ago. Should i put the rod in the other engine (i am going electric pump also) to stop oil from coming down so quickly from the cam to the bottom of the engine or is that a good thing to do? Thanks guys ps it will be on the street 95% of the time.

kenSS

iTrader: (1)

take it out. don't need it. more oil in the pan the better.

ex-SS-ve

iTrader: (9)

i just had the block tapped and put a threaded npt plug in there

T/AWS6969

uhhhhhhhhhhhhhhhhhhhh okay sounds like 1 to 1. whos gonna break the tie???????????????

slow95z

iTrader: (33)

it won't hurt anything to leave it in if thats what you want to know.without the fuel pump under it it will nevr touch the cam, but i always take it outwhen i put a new gasket there on the blockoff plate to make sure no oil leak starts.

T/AWS6969

thanks guys

slvr98camaro

iTrader: (1)

i wouldnt leave it in personally, just take it out

T/AWS6969

Ha! my girlfriend saw me put up this post and she wants me to leave my rod in. LOL!!!!!!

steelcity6

Lol, tell her you need to pull it out..you dont want complications later. I've always taken them out..