v8sten

iTrader: (5)

Stock one, from i dont know what. hughes and tci makes a locking dip stick thaat will fix your problem. or you could get creative with tie straps

ZONES89RS

iTrader: (25)

Dem sum real tarz rite der!

v8sten

iTrader: (5)

yes they are. hopefully i can get some work done on it this weekend, i had to fly out to cali for work and havent been able to touch it in a few days.

ZONES89RS

iTrader: (25)

Well looks like a UPR chromoly anti roll bar is the best choice as far as price. Fixing to get one and throw the dope on.

Jesus Martinez

Nice car build ima post pics of my 355 fox

v8sten

iTrader: (5)

Thanks its a long time in the making. hopefully ill have the subframe connectors in this weekend. then its plumbing the rest of fuel system, running the battery cable, bleeding the brakes, installing the exhaust and reinstalling the interior. Then in1.5 weeks ill get my new shoes and its time to start hustling

ZONES89RS

iTrader: (25)

Bout damn time. Lol. I been driving the hell out of the 80. Gonna leave the anti roll bar hooked up when I install one. From what I see if you are not hard cornering it is ok to leave the links hooked up.

v8sten

iTrader: (5)

This is a video i came across. a 5th gen camaro on an unknown hp nitrous shot and drag radials and me on motor and reg street tires. i won by a few lengths.

Jesus Martinez

nice i just raced a 424rwhp 01 z28 we were even till 130 then he pulled me one car feels like im not getting enough fuel on top end idk?? ima race him again this weekend ima record it its gunna be a ctsv with a 75 shot racing too should be fun

v8sten

iTrader: (5)

New Shoes


I had to change the banjo and grind half the head off of the banjo bolt

v8sten

iTrader: (5)

Got the pass side sub frame mostly in. Still gotta weld the bottom

ZONES89RS

iTrader: (25)

Damn, that's alotta work for sub frames from what I'm used to.

v8sten

iTrader: (5)

Yup. But the end result will be bad *** and later I can tie the cage into it

ZONES89RS

iTrader: (25)

For sure, they are probably 5x better than the regular tie ins I have that came on my car.

v8sten

iTrader: (5)

pass side done. I gotta fix the natural weight reduction by replacing rear drivers side floor board. prolly just gunna cut it out of a junk car.

ZONES89RS

iTrader: (25)

That will work. Was gonna do the same on a camaro once. The parts camaro was just as bad...

v8sten

iTrader: (5)

well after a whole morning of searching through pick n pulls i found a donor floorboard. its out of a 93 lx hatch and it is a little different but will do fine. now lets see if the rumors are true about the 86 and older cars using thinner gauge sheet metal is true.

v8sten

iTrader: (5)

rough cut the rust out

ZONES89RS

iTrader: (25)

When I fixed the roof rust, I used sheet metal from my 89 RS. I'll say the quality of a camaro sheet metal is superior. Lol. My camaro lives on.

NitrousExpress

iTrader: (4)

Very nice build, I actually took time to read all this, looks like a great car.

-Garrett