This is not a classifieds forum. Post ALL sales in here.
#81
TECH Regular
Join Date: Jan 2002
Location: Tulsa , Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
These cost $632.99 from Jegs, still new in the box I only took one piston out to take pic.
SRP # 139834
4.350'' Bore (611 grams)
Specs: Dome vol. 43cc
C/R: 112cc - 13.8:1; 118cc - 12.7:1; 124cc - 11.8:1 (add .2 for 4.350''). 1.270''
C/H, 6.385'' Rod, 4.250'' Stroke. 8/pkg.
I'll take $525 for the pistons, you save over $100. I also have a set of new Total seal rings (non gapless) for these pistons part # CR9190 105 that were $100 that I'd throw in for $75.
Tubbeds10@aol.com
#82
1996 Camaro Z28 For Sale
I hate to do it but I just don't have the time anymore. Or the money, and I need the money. This sucks but here goes...
I have a 1996 Camaro Z28, LT1 block has no machine work done to it. Stock heads, crane double valve springs and I'm sure the lifters are still useable but the are new too. Camshaft is CC306 (and I still have the stock one). Engine was converted to carb motor. MSD 85551 probillet dizzy, new wires, msd 6al box, new pills, led shift light. Also has lower alt bracket with new belt, Cloyes double roller timing chain, CSI h2o pump, GMPP carb conversion intake manifold, and hooker super comp long tube headers (uncoated but still in great shape since the weren't hardly used) that have o2 bungs welded in them. I have a boom tube exhaust that still needs to be fitted to the car from a winston cup car (back when it was the winston cup).
The interior is all stock except the dash is a VFN fiberglass dash not yet installed. The center console is also out of a 2002 camaro z28. Tranny has had work done to it. Cryo'ed internals, steel shift fork, all new bearings, B&M Ripper Shifter (payed 1600 for all the work and it has roughly 5-6 thousand miles on it).
Also have an Summit 8 galloon fuel cell with saftey foam, stainless braided lines, fuel pressure reg, fuel pressure gauge, in-line filter, electric fuel pump (all this is hooked up already).
I'm sure I forgot something else but thats all i can think of right now. If your interested, please send emails to ejmarch@carolina.rr.com .
The car is at my house in Monroe, NC and I hold the title...not the bank. I'm only wanting 4000 and obviously we can talk maybe. I could part the entire car out for over 4000, but thats my last resort.
Thanks for looking!
I have a 1996 Camaro Z28, LT1 block has no machine work done to it. Stock heads, crane double valve springs and I'm sure the lifters are still useable but the are new too. Camshaft is CC306 (and I still have the stock one). Engine was converted to carb motor. MSD 85551 probillet dizzy, new wires, msd 6al box, new pills, led shift light. Also has lower alt bracket with new belt, Cloyes double roller timing chain, CSI h2o pump, GMPP carb conversion intake manifold, and hooker super comp long tube headers (uncoated but still in great shape since the weren't hardly used) that have o2 bungs welded in them. I have a boom tube exhaust that still needs to be fitted to the car from a winston cup car (back when it was the winston cup).
The interior is all stock except the dash is a VFN fiberglass dash not yet installed. The center console is also out of a 2002 camaro z28. Tranny has had work done to it. Cryo'ed internals, steel shift fork, all new bearings, B&M Ripper Shifter (payed 1600 for all the work and it has roughly 5-6 thousand miles on it).
Also have an Summit 8 galloon fuel cell with saftey foam, stainless braided lines, fuel pressure reg, fuel pressure gauge, in-line filter, electric fuel pump (all this is hooked up already).
I'm sure I forgot something else but thats all i can think of right now. If your interested, please send emails to ejmarch@carolina.rr.com .
The car is at my house in Monroe, NC and I hold the title...not the bank. I'm only wanting 4000 and obviously we can talk maybe. I could part the entire car out for over 4000, but thats my last resort.
Thanks for looking!
Last edited by TripleBlack; 07-10-2008 at 12:38 AM. Reason: more information
#83
12 Second Club
iTrader: (2)
Join Date: Apr 2007
Location: SE Houston
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
i have a mildly built 355 for sale, just built within the last couple of months, idled and driven about 1 mile, but got a new toy so i am parting out the car. it has a cast gm crank and rods, balanced/blueprinted, arp rod bolts, world s/r torker heads, speedpro powerforged dome pistons (9.4:1 with the 76 cc heads on there right now, 10.5:1 with 64's, and 11.4:1 with 58's) not sure on the cam specs, but it sounded pretty nasty when it was running, my friend that built the motor said it was around .520 lift and 23x duration, but didnt remember for sure, and a holley street dominator single plane intake. this is the complete motor from oil pan to intake, and i will include the edelbrock carburetor for an extra $100
$950 obo, i have about $2500 in it
almost brand new edelbrock 750 carburetor, only been on the car for a couple months, only ran maybe 30 minutes, was 275 new, will take $125 obo
holley 650 single pumper carb, used - $30 obo
holley mechanical fuel pump - $10
weiand stealth dual plane intake: sold
will take $975 for everything listed
everything is located on the southeast side of houston, in seabrook, pm or call me at 281-794-0759
david
$950 obo, i have about $2500 in it
almost brand new edelbrock 750 carburetor, only been on the car for a couple months, only ran maybe 30 minutes, was 275 new, will take $125 obo
holley 650 single pumper carb, used - $30 obo
holley mechanical fuel pump - $10
weiand stealth dual plane intake: sold
will take $975 for everything listed
everything is located on the southeast side of houston, in seabrook, pm or call me at 281-794-0759
david
#86
Launching!
iTrader: (1)
Join Date: Aug 2005
Location: On top of your MOM!
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Some stuff I either took in trade or dont need anymore....
Holley 82751 750 HP series double pumper like new, with fuel line&gauge bolt on and go.
$385 shipped
Harwood 3 gallon cell w/ foam NEW never mounted or had fuel in it.
$85 shipped
Moroso BBC Solid Mounts
$24 shipped
Milodon BBC Pickup New 18301
$35 shipped
Blaster 2 coil w/ stainless band clamp bracket New
$32.50 shipped
Holley Air Bleeds 2 of every size from 20-79
$65 shipped
Lemme know if you need any of this stuff??????????
Holley 82751 750 HP series double pumper like new, with fuel line&gauge bolt on and go.
$385 shipped
Harwood 3 gallon cell w/ foam NEW never mounted or had fuel in it.
$85 shipped
Moroso BBC Solid Mounts
$24 shipped
Milodon BBC Pickup New 18301
$35 shipped
Blaster 2 coil w/ stainless band clamp bracket New
$32.50 shipped
Holley Air Bleeds 2 of every size from 20-79
$65 shipped
Lemme know if you need any of this stuff??????????
#87
Launching!
iTrader: (5)
Join Date: Feb 2006
Location: Lenoir City, TN
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
NX Gemini Twin perimeter plate system
NX Gemini Twin Stage 6 perimeter plate for 4150 carb 50-300 hp complete system with purge,all jets,and wilson solenoid mounting bracket. $400.00 shipped.
__________________
__________________
Last edited by Hot Copper Z; 12-02-2008 at 10:31 PM.
#88
2000 Camaro Z28 convertible,damaged, roller only
HEY GUYS,,,this is a complete car minus engine/6spd trans/computer. trying to sell the car as a whole first,,$2000.00. if not,,i am parting it out to make somemore $$. damage to the right rear quarter/rail/bumper/light. it is totally repairable!i cant beleive they totalled this car. has a good salvage title.please call me with questions. i am a new member and learing my way around this site. and by the way,,i love the site. let me know what you need,,,thanks,,,dominic at 630-703-6000 i will send you the pics!
>
cant figure out how to get pics on this page but,,try craigslist chicago!
>
[URL="Reply to: sale-scwfw-2209929211@craigslist.org"]
>
cant figure out how to get pics on this page but,,try craigslist chicago!
>
[URL="Reply to: sale-scwfw-2209929211@craigslist.org"]
Last edited by sickracing; 02-12-2011 at 08:46 AM. Reason: pictures