Gauging interest on a complete 408 w/direct port
#1
Thread Starter
Registered User
iTrader: (125)
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Gauging interest on a complete 408 w/direct port
Fist off i am selling this for a real good friend of mine the motor has 10 passes about 2k miles has lunati pro billet rods, lunati crank, custom dimond nitrous pistons, 6.0 iron block, modified ls6 oil pump, katech solid tensioner, futural ported and polished throttle body, cam i am not sure i know the lift it minor 613/613 heads are stage 2, also you will get tr6 plugs and nology plug wires this motor is very fast and there is a lot of room for improvement, such as stage 3 heads bigger cam/solid. The intake is a ls6 plumbed with a NOS direct port pills included are 175, 250, And 300hp also included a custom made fuel cell to fit in battery location, aeromotive pump, crome fuel regulator, billet fuel filter and all fittings and ss braided lines, entergy suspension poly motor mounts full k member will stay bolted to it minus shocks and rotors. His car weighs 3900lbs and the motor on 93 octane went 11.2 @ 121 a tnt power ring was sprayed at 150 and went a 10.2 at 134mph this was through the throttle body the compression ratio is a 11.6-1 and runs great on pump gas
he want to sell this set up BUT needs to know what would be a fair price.. he doesnt want to screw himself but wants to be fair and make someone happy as well
the long block costed 9,000 without the $700 nitrous kit apx $700 dedicated fuel system intake and all other accessories
Let me know what you all think as soon as a serious buyer comes into sight motor will be out of car.
Everything is located in Louisiana
he want to sell this set up BUT needs to know what would be a fair price.. he doesnt want to screw himself but wants to be fair and make someone happy as well
the long block costed 9,000 without the $700 nitrous kit apx $700 dedicated fuel system intake and all other accessories
Let me know what you all think as soon as a serious buyer comes into sight motor will be out of car.
Everything is located in Louisiana
#3
Thread Starter
Registered User
iTrader: (125)
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Speed demond motorsports in Texas the motor is well built i havent ad a lick of problems with it runs awsome and will for a long time to come but like any motor you have to respect it the motor was built to handle a 300 shot you could spray more but I wouldnt and 300 blast is heavy and it will hit hard real hard
#6
Originally Posted by Tim98TA
Thought you were sellin this for a friend?
Timmy.... you sell that short block yet?