central and north alabama
#3545
TECH Senior Member
iTrader: (71)
ok fellas i ordering my parts and i need alittle shopping list help...
i ordered Lpp long tubes and ORY, SLP lid, now i know i'll need block off plates for the EGR and stuff.... but since i deleting the cats will i need o2 extentions and or o2 simulators? i will have this thing dyno tuned soon as all parts are in and installed so i unsure about what happens to rear o2 sensors..... and what else should i need for all this to come together? after i ride in some of you fellas rides i will make my choice on TQ converter and install it too...
so here is the run down:
LT LPP headers
LPP ORY
SLP lid
Seal-for-good Header gaskets
3-3" stainless band clamps
LS1 block off plate kit
TQ converter
sphon tq arm... already got it bought i think
Dyno tune
o2 extentions???
missin anything?
i gonna stick this in the general board too but i wanted to give you guys first heads up
i ordered Lpp long tubes and ORY, SLP lid, now i know i'll need block off plates for the EGR and stuff.... but since i deleting the cats will i need o2 extentions and or o2 simulators? i will have this thing dyno tuned soon as all parts are in and installed so i unsure about what happens to rear o2 sensors..... and what else should i need for all this to come together? after i ride in some of you fellas rides i will make my choice on TQ converter and install it too...
so here is the run down:
LT LPP headers
LPP ORY
SLP lid
Seal-for-good Header gaskets
3-3" stainless band clamps
LS1 block off plate kit
TQ converter
sphon tq arm... already got it bought i think
Dyno tune
o2 extentions???
missin anything?
i gonna stick this in the general board too but i wanted to give you guys first heads up
You only need your front 02s, do NOT buy o2 extensions.. Save yourself some time/money/hassle and buy Corvette o2s now. They are better (quality), read better, and cleaner install. Extensions and splicing are **** ways.
You can re-use the stock header gaskets, I actually recommend that.
Get on Summit or Jegs (forget which one it is) and buy the 30$ manual cutout they sell. It is just a plain black one and comes with the plate/screws/bolts. Another option is a QTP electric that runs around 150$ or they sell some on Ebay but I have not heard very many good things from them.
If you are in Huntsville I will come help if you pay for gas and buy me a cheap lunch. If we start around 8AM the headers will be done around lunch time.
#3546
thanks lemons but i a decent ways from huntsville but gas and lunch is never a problem hell i'll buy beer and whiskey if this gets to be a big deal!!!.
yes the Lpps are race style,... and a guy just e-mailed me back on a ls6 manifold for 275 shipped, is that good?
will i see much gain from a cut out? i nevr had luck with them before, leaky SOBs?
and i gettin excited bout this... is there a dyno tune in huntsville? if not has anyone used Hinson Supercars in Hueytown ALabama?
yes the Lpps are race style,... and a guy just e-mailed me back on a ls6 manifold for 275 shipped, is that good?
will i see much gain from a cut out? i nevr had luck with them before, leaky SOBs?
and i gettin excited bout this... is there a dyno tune in huntsville? if not has anyone used Hinson Supercars in Hueytown ALabama?
#3548
and is it any easier to install headers on a car with the trans out? or easier to pull the trans without headers? cause if i do a converter at same time as header install i wondered which to do first
#3550
thanks lemons but i a decent ways from huntsville but gas and lunch is never a problem hell i'll buy beer and whiskey if this gets to be a big deal!!!.
yes the Lpps are race style,... and a guy just e-mailed me back on a ls6 manifold for 275 shipped, is that good?
will i see much gain from a cut out? i nevr had luck with them before, leaky SOBs?
and i gettin excited bout this... is there a dyno tune in huntsville? if not has anyone used Hinson Supercars in Hueytown ALabama?
yes the Lpps are race style,... and a guy just e-mailed me back on a ls6 manifold for 275 shipped, is that good?
will i see much gain from a cut out? i nevr had luck with them before, leaky SOBs?
and i gettin excited bout this... is there a dyno tune in huntsville? if not has anyone used Hinson Supercars in Hueytown ALabama?
I've used Henson's dyno with a E in Hueytown. I think Hinson with an I is located in Lacey Springs. I didn't know he had his own dyno though. There are a couple of other dynos in the Huntsville area if he doesn't have one. Track Masters is the only one I can think of right off hand.
Last edited by Skillet; 10-24-2009 at 12:17 PM.
#3551
TECH Senior Member
iTrader: (71)
thanks lemons but i a decent ways from huntsville but gas and lunch is never a problem hell i'll buy beer and whiskey if this gets to be a big deal!!!.
yes the Lpps are race style,... and a guy just e-mailed me back on a ls6 manifold for 275 shipped, is that good?
will i see much gain from a cut out? i nevr had luck with them before, leaky SOBs?
and i gettin excited bout this... is there a dyno tune in huntsville? if not has anyone used Hinson Supercars in Hueytown ALabama?
yes the Lpps are race style,... and a guy just e-mailed me back on a ls6 manifold for 275 shipped, is that good?
will i see much gain from a cut out? i nevr had luck with them before, leaky SOBs?
and i gettin excited bout this... is there a dyno tune in huntsville? if not has anyone used Hinson Supercars in Hueytown ALabama?
I would get the intake..
Like ^^^ said, you might see 20Rwhp or you might see 3Rwhp.. Won't hurt either way for 30$.
Don't worry about where the dyno is, worry about where and when Gomer will meet you!
#3552
I've used Henson's dyno with a E in Hueytown. I think Hinson with an I is located in Lacey Springs. I didn't know he had his own dyno though. There are a couple of other dynos in the Huntsville area if he doesn't have one. Track Masters is the only one I can think of right off hand.
http://hinsonsupercars.com/t-contact.aspx
and how do i get ahold of gomer?
#3555
TECH Senior Member
iTrader: (71)
here is the link of how i got them... he told me they was in hueytown.. i dunno tho.....
http://hinsonsupercars.com/t-contact.aspx
and how do i get ahold of gomer?
http://hinsonsupercars.com/t-contact.aspx
and how do i get ahold of gomer?
HOMERUNHTR21 I want that lid you have I believe, hit me up PM
#3556
here is the link of how i got them... he told me they was in hueytown.. i dunno tho.....
http://hinsonsupercars.com/t-contact.aspx
and how do i get ahold of gomer?
http://hinsonsupercars.com/t-contact.aspx
and how do i get ahold of gomer?
Gomer's profile