central and north alabama
04-27-2007, 10:05 PM
#1061
On The Tree
iTrader: (4)
Join Date: Jun 2006
Location: Jacksonville, AL
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99corvette
Anyone going to be at steele this weekend?
04-28-2007, 09:29 PM
#1067
Well guys i ran into a couple of problems on the TH350 install 
Gotta figure out someway to hook up the shifter linkage to the side of the transmission.
The BMR crossmember hole does not match up to the holes on the transmission.
Gotta figure out someway to hook back up the coolant lines.
Other than that its pretty good. Atleast the trans is bolted up to the engine now with the torque converter so some progress was made
Gotta figure out someway to hook up the shifter linkage to the side of the transmission.
The BMR crossmember hole does not match up to the holes on the transmission
.Gotta figure out someway to hook back up the coolant lines.
Other than that its pretty good. Atleast the trans is bolted up to the engine now with the torque converter so some progress was made
04-30-2007, 12:16 AM
#1068
Originally Posted by bjamick
Well guys i ran into a couple of problems on the TH350 install
Gotta figure out someway to hook up the shifter linkage to the side of the transmission.
The BMR crossmember hole does not match up to the holes on the transmission.
Gotta figure out someway to hook back up the coolant lines.
Other than that its pretty good. Atleast the trans is bolted up to the engine now with the torque converter so some progress was made
Gotta figure out someway to hook up the shifter linkage to the side of the transmission.
The BMR crossmember hole does not match up to the holes on the transmission
.Gotta figure out someway to hook back up the coolant lines.
Other than that its pretty good. Atleast the trans is bolted up to the engine now with the torque converter so some progress was made
Where n the Ham are you?
04-30-2007, 08:26 AM
#1069
Originally Posted by OMGWTFBODY
Where n the Ham are you?
04-30-2007, 09:05 AM
#1070
Originally Posted by bjamick
I live right off hwy 280, oh and were having a picnic thing this saturday at 1:30PM at the trussville civitan park across from the Police Dep. Were gunna have a lil car meet and play football so everybody is welcome just make sure you have a clean car bc were gunna have a lil photoshoot. Im gunna try and get my car up there but we'll just have to see.
At least your making progress on the trans. I know how much of a PITA it is to fabricate stuff to fit. You shouldnt be to far from finishing now. The hard part is done sounds like. I finally got busy on mine yesterday, dropped the trans, cut the tunnel brace and reinstalled. Everything should be good to go now. Or at least I hope it is.
04-30-2007, 10:02 AM
#1071
Originally Posted by bjamick
I live right off hwy 280, oh and were having a picnic thing this saturday at 1:30PM at the trussville civitan park across from the Police Dep. Were gunna have a lil car meet and play football so everybody is welcome just make sure you have a clean car bc were gunna have a lil photoshoot. Im gunna try and get my car up there but we'll just have to see.
I'll be in town for my 21st on Sat. if i can make it, I'll drop by. <car is kinda clean. lol.
I haven't been to the Civvie park since it flooded in mike 1995.
04-30-2007, 10:58 AM
#1072
Originally Posted by Z'mnypit
Who's having the picnic?
At least your making progress on the trans. I know how much of a PITA it is to fabricate stuff to fit. You shouldnt be to far from finishing now. The hard part is done sounds like. I finally got busy on mine yesterday, dropped the trans, cut the tunnel brace and reinstalled. Everything should be good to go now. Or at least I hope it is.
At least your making progress on the trans. I know how much of a PITA it is to fabricate stuff to fit. You shouldnt be to far from finishing now. The hard part is done sounds like. I finally got busy on mine yesterday, dropped the trans, cut the tunnel brace and reinstalled. Everything should be good to go now. Or at least I hope it is.
. Ya vann its in and bolted up just gotta order a new torque arm Bushing.
Run some new coolant lines to the B&M trans cooler.
Figure out someway to hook up my shifter linkage to the bracket on the side of the transmission
Then im done
04-30-2007, 12:55 PM
#1073
Originally Posted by bjamick
Its our lil car club and jsut whoever, there will be just a few F-Bods unless i can get you guys to show up .
Ya vann its in and bolted up just gotta order a new torque arm Bushing.
Run some new coolant lines to the B&M trans cooler.
Figure out someway to hook up my shifter linkage to the bracket on the side of the transmission
Then im done
. Ya vann its in and bolted up just gotta order a new torque arm Bushing.
Run some new coolant lines to the B&M trans cooler.
Figure out someway to hook up my shifter linkage to the bracket on the side of the transmission
Then im done
04-30-2007, 01:16 PM
#1074
Originally Posted by Z'mnypit
Good deal. I bet your gald! Should all be down hill from here. You still gota do your cam swap right?
04-30-2007, 06:05 PM
#1075
10 Second Club
iTrader: (12)
Join Date: Oct 2006
Location: Alabama
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bjamick
Ya but im gunna do a complete sea foaming before though and then do a tune up.. just wana make sure she is in tip top condition before i do the cam swap
check out their website maybe its on their 
