My new EXO-SKEL
04-27-2007, 12:01 AM
#1
9 Second Club
Thread Starter
iTrader: (8)
Join Date: Aug 2005
Location: Little Rock, AR
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
My new EXO-SKEL Just got my new clutch. Installed it today. It grabs like a bitch, pedal is a lot stiffer that the triple disk that i put in a turbo F body. (maybe due to the adjustable master) I am going to replace the adjustable with a stock master tomorrow. It has a lot of chatter when the clutch is pushed in. I guess with this big cam I won't be able to get away from this. It will take some getting use too. I had to modify the stock slave so I could get clearance between the pressure plate and the throw out bearing. (about .060) I hope this clutch will hold the power and last.
http://video.ls1tech.com/video/8e1a5...1d00093ff4.htm
http://video.ls1tech.com/video/ebe38...1d0009d84f.htm
http://video.ls1tech.com/video/9c27a...1d000b4f44.htm
http://video.ls1tech.com/video/4748c...1d000bc99e.htm
http://video.ls1tech.com/video/8e1a5...1d00093ff4.htm
http://video.ls1tech.com/video/ebe38...1d0009d84f.htm
http://video.ls1tech.com/video/9c27a...1d000b4f44.htm
http://video.ls1tech.com/video/4748c...1d000bc99e.htm
Last edited by 02402RAMAIR; 05-01-2007 at 03:16 PM.
Trending Topics
05-01-2007, 04:09 PM
#11
9 Second Club
Thread Starter
iTrader: (8)
Join Date: Aug 2005
Location: Little Rock, AR
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
this car has not been tuned or put on the dyno yet. in my f body this motor made 491rwhp thru a 3600 converter. 648rwhp on a 200 shot. the dyno I was using would not give me an accurate torque.
