Columbus, GA
08-26-2010, 03:55 PM
#2604
TECH Enthusiast
iTrader: (11)
Join Date: Nov 2004
Location: columbus GA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Got the car back, I will probably change the spark plugs tomorrow and do some more tuning. Mike, I will come out tomorrow night, I want to try something to your car to help the idle out. Craig, call me later, I kinda feel like going on post and fixing the exhaust rattles and adjust the pinion angle while were at it. Don't know if we will ba able to get it on a drive on lift.
08-26-2010, 04:40 PM
#2605
11 Second Club
iTrader: (1)
Join Date: Jan 2010
Location: Scholfield Barracks, HI
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
http://ls2.com/forums/showthread.php?p=12606079
http://www.ls2.com/forums/showthread.php?t=654515
the second post is a guy that made a T-fitting adapter like you were talking about.....but looks like the Ligenfelter might be your best choice....
i also came across a post where a guy said he got one from street and performance so i guess you could try there too.
https://ls1tech.com/forums/8511094-post8.html
doesn't seem like something that will be easy to come by...by from the little searching i did there are adapters out there...they just seem hard to find....you might be better off just drilling/tapping or doing the t-fitting thing...
08-26-2010, 09:27 PM
#2606
TECH Enthusiast
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Got the car back, I will probably change the spark plugs tomorrow and do some more tuning. Mike, I will come out tomorrow night, I want to try something to your car to help the idle out. Craig, call me later, I kinda feel like going on post and fixing the exhaust rattles and adjust the pinion angle while were at it. Don't know if we will ba able to get it on a drive on lift.
08-27-2010, 06:50 PM
#2612
TECH Enthusiast
iTrader: (11)
Join Date: Nov 2004
Location: columbus GA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Looking good, got the plugs swapped, oil and fuel filter changed. I will fix the lean afr at start up tonight when I head to sonic. Is it still on for tonight?
08-29-2010, 02:24 PM
#2618
11 Second Club
iTrader: (1)
Join Date: Jan 2010
Location: Scholfield Barracks, HI
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
lol...yeah bro, looked like you were doing a burn-out in the box rather than launching, lol....that last run was good though...couldn't tell who took it....looks like you need a tune-up too....and some tuning....then i bet you could take him....
08-29-2010, 05:43 PM
#2619
Teching In
iTrader: (2)
Join Date: Mar 2010
Location: Columbus, Ga
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I took him on the last run, was able to get things right but I couldnt full throttle the whole time because of the slipping. was getting nervous. rather have a bad tranny as opposed to a bad engine and tranny.
Looked at what tune was in there and it seems running abit more timing than necessary and feels like im running rich(hard to tell without wideband).
Was spinning tires at 1500rpm, not so good lol
Looked at what tune was in there and it seems running abit more timing than necessary and feels like im running rich(hard to tell without wideband).
Was spinning tires at 1500rpm, not so good lol
08-30-2010, 06:47 AM
#2620
I took him on the last run, was able to get things right but I couldnt full throttle the whole time because of the slipping. was getting nervous. rather have a bad tranny as opposed to a bad engine and tranny.
Looked at what tune was in there and it seems running abit more timing than necessary and feels like im running rich(hard to tell without wideband).
Was spinning tires at 1500rpm, not so good lol
Looked at what tune was in there and it seems running abit more timing than necessary and feels like im running rich(hard to tell without wideband).
Was spinning tires at 1500rpm, not so good lol
. Three cheers for the TPI. LOL Your lucky my bottle wasn't on.