When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
when I get private message access I will send u his new email its not threw that asc no more
Please PM Marcus' new contact info to me too. I've been planning on contacting him to (again) offer taking his data mining operation off his hands (I'm pretty sure its boxes of hardcopy records, not an electronic database or spreadsheet). My ultimate goal is to capture the hardcopy info a spreadsheet so that its much easier to access. Thanks.
Please PM Marcus' new contact info to me too. I've been planning on contacting him to (again) offer taking his data mining operation off his hands (I'm pretty sure its boxes of hardcopy records, not an electronic database or spreadsheet). My ultimate goal is to capture the hardcopy info a spreadsheet so that its much easier to access. Thanks.
Could you please also send me his contact info? I'd like to have my conversion # on the custom plate that goes over/around the TCS switch that I am having made. Thank you!
Could you please also send me his contact info? I'd like to have my conversion # on the custom plate that goes over/around the TCS switch that I am having made. Thank you!
Could you please also send me his contact info? I'd like to have my conversion # on the custom plate that goes over/around the TCS switch that I am having made. Thank you!
I have contacted 2 vendors about the plate, I have 1 on hand now and was delayed due to last week's weather. The one I have isn't exactly the right shade of yellow but they were awesome to work with and matched the fonts from samples I found online and on the forums here. The only difference I have found is the ones I have seen online had a metal band on the outside (brass color). After I get the second I will determine which goes on the dash and which goes under the hood. Finding the right material that won't effect the plaque and survive Texas summers is my next course of action.
I have contacted 2 vendors about the plate, I have 1 on hand now and was delayed due to last week's weather. The one I have isn't exactly the right shade of yellow but they were awesome to work with and matched the fonts from samples I found online and on the forums here. The only difference I have found is the ones I have seen online had a metal band on the outside (brass color). After I get the second I will determine which goes on the dash and which goes under the hood. Finding the right material that won't effect the plaque and survive Texas summers is my next course of action.
Top badge is from a vendor I supplied them with sample photos, color codes, and graphics I was able to locate. I came up with the measurements the best I could estimate from photo samples.
Bottom badge is from a licensed vendor who only needed me to explain and provide a sample, they had the graphic, fonts, etc.
The hardest part was getting the build number right, the top one took a few days of back and forth, the bottom the vendor stated this had to be done by hand?
Top one is twice as thick, seems brighter yellow, and the lettering/decal seem softer on the edges but there is a slight depth that I like about it. Bottom one does bend a little and it comes with an adhesive backing already applied! I think they both came out excellent and deciding which will be put on the dash is going to be tough.
Top badge is from a vendor I supplied them with sample photos, color codes, and graphics I was able to locate. I came up with the measurements the best I could estimate from photo samples.
Bottom badge is from a licensed vendor who only needed me to explain and provide a sample, they had the graphic, fonts, etc.
The hardest part was getting the build number right, the top one took a few days of back and forth, the bottom the vendor stated this had to be done by hand?
Top one is twice as thick, seems brighter yellow, and the lettering/decal seem softer on the edges but there is a slight depth that I like about it. Bottom one does bend a little and it comes with an adhesive backing already applied! I think they both came out excellent and deciding which will be put on the dash is going to be tough.
Please PM Marcus' new contact info to me too. I've been planning on contacting him to (again) offer taking his data mining operation off his hands (I'm pretty sure its boxes of hardcopy records, not an electronic database or spreadsheet). My ultimate goal is to capture the hardcopy info a spreadsheet so that its much easier to access. Thanks.
Hey Justin. I am 02CE guy and my VIN is 2G2FV22G822140952. Date built is 02/02. What number mine is out of 510 (Auto with T-tops) would be great. Thanks in advance! - John
Hello,
I have a 02' CETA convertible with a M6; my VIN # is 2G2FV32G022122872. I would greatly appreciate any help in finding my ASC number. Thank you.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
