Stainless Works "special request" S10 Header group buy!
#1
Stainless Works "special request" S10 Header group buy!
Based on the overwhelming response we got from the previous thread, we are putting together a group buy to get this project rolling.
We do not currently make any S10 swap headers and understand there is not a heck of a lot out there for you guys who are dropping more than a stock LS1 or for those trucks that are slammed to the ground.
Stainless Works Agrees to Provide
> 304L Stainless Steel 2nd Gen S10 LS swap header
> In frame design that might require some clearancing (flattening of body seams, minor grinding, etc) but no major modifications
> 1 7/8" design UNLESS THIS PROVES TO BE IMPOSSIBLE
--- If 1 7/8" cannot be achieved, we will be forced to drop to 1 3/4" OR make other adjustments.
--- Group Buy members will have input on possible alternate options if 1 7/8" can't work.
> Preliminary pricing for the group buy will be set at $890.
---The standard price of a set of Stainless Works headers is $890. Until we have a truck here, we cannot put an official price on the build, but we should be able to hit that price point unless we really have do something out of the box and nonstandard.
What Stainless Works Needs From You
> 20 Group Buy Participants
> $150 good faith deposit
--- Applies to the ideal 1 7/8" header design and 1 3/4" Plan B design
> A truck or two for R&D
--- Ideally a truck that is not quite finished but setup in a fairly standard manner (we cannot use a completely wild custom)
--- May need truck for as long as 6 weeks
To sign up for the group buy, you can post in this thread, PM me or call Jason at (800) 878-3635 X232.
If you are interested in the Group buy, close enough to bring us a truck, and able to give it up for a few weeks this winter, please post details on the truck.
THANKS GUYS. Let's see what we can make happen.
S10 LS Swap Header Group Buy List
1. mecanicman
2. Petraszewsky <=PAID DEPOSIT=>
3. SoLow (If they will fit a 1st gen truck)
4. artlsx10 <=PAID DEPOSIT=>
5. lowloudnproud1
6. rpturbo
7. JOER
8. NES10 <=PAID DEPOSIT=>
9. 89gearhead
10. antimatter69 <=PAID DEPOSIT=>
11. JARED -CURRENT PERFORMANCE <=PAID DEPOSIT=>
12. caddyman1961
13. CouJoe56
14. FakeSnake
15. tefoster <=PAID DEPOSIT=>
16. ZQV8 <=PAID DEPOSIT=>
17. TXMaro <=PAID DEPOSIT=>
18. Robertvon <=PAID DEPOSIT=>
19. nycblazer <=PAID DEPOSIT=>
20. montecarloss <=PAID DEPOSIT=>
21. truck7man <=PAID DEPOSIT=>
22. ktown <=PAID DEPOSIT=>
We do not currently make any S10 swap headers and understand there is not a heck of a lot out there for you guys who are dropping more than a stock LS1 or for those trucks that are slammed to the ground.
Stainless Works Agrees to Provide
> 304L Stainless Steel 2nd Gen S10 LS swap header
> In frame design that might require some clearancing (flattening of body seams, minor grinding, etc) but no major modifications
> 1 7/8" design UNLESS THIS PROVES TO BE IMPOSSIBLE
--- If 1 7/8" cannot be achieved, we will be forced to drop to 1 3/4" OR make other adjustments.
--- Group Buy members will have input on possible alternate options if 1 7/8" can't work.
> Preliminary pricing for the group buy will be set at $890.
---The standard price of a set of Stainless Works headers is $890. Until we have a truck here, we cannot put an official price on the build, but we should be able to hit that price point unless we really have do something out of the box and nonstandard.
What Stainless Works Needs From You
> 20 Group Buy Participants
> $150 good faith deposit
--- Applies to the ideal 1 7/8" header design and 1 3/4" Plan B design
> A truck or two for R&D
--- Ideally a truck that is not quite finished but setup in a fairly standard manner (we cannot use a completely wild custom)
--- May need truck for as long as 6 weeks
To sign up for the group buy, you can post in this thread, PM me or call Jason at (800) 878-3635 X232.
If you are interested in the Group buy, close enough to bring us a truck, and able to give it up for a few weeks this winter, please post details on the truck.
THANKS GUYS. Let's see what we can make happen.
S10 LS Swap Header Group Buy List
1. mecanicman
2. Petraszewsky <=PAID DEPOSIT=>
3. SoLow (If they will fit a 1st gen truck)
4. artlsx10 <=PAID DEPOSIT=>
5. lowloudnproud1
6. rpturbo
7. JOER
8. NES10 <=PAID DEPOSIT=>
9. 89gearhead
10. antimatter69 <=PAID DEPOSIT=>
11. JARED -CURRENT PERFORMANCE <=PAID DEPOSIT=>
12. caddyman1961
13. CouJoe56
14. FakeSnake
15. tefoster <=PAID DEPOSIT=>
16. ZQV8 <=PAID DEPOSIT=>
17. TXMaro <=PAID DEPOSIT=>
18. Robertvon <=PAID DEPOSIT=>
19. nycblazer <=PAID DEPOSIT=>
20. montecarloss <=PAID DEPOSIT=>
21. truck7man <=PAID DEPOSIT=>
22. ktown <=PAID DEPOSIT=>
Last edited by StainlessWorks; 01-09-2013 at 02:32 PM.
#3
TECH Enthusiast
iTrader: (6)
Join Date: Dec 2007
Location: Rittman, Ohio
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
Theres a few of us lsx swapped guys around you in the northeastern ohio area. Ill let them know. Mines been complete for a year with longtubes that i bought off another ls swapped s10 but if you need more trucks let me know. Im about an hr away in akron.
Trending Topics
#11
TECH Enthusiast
iTrader: (6)
Join Date: Dec 2007
Location: Rittman, Ohio
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
Come on people if you want them then put some money down so itll actually happen! Otherwise its just going to be like all the other times companies said theyd make them then didnt because no one seemed interested. If I didnt already have longtubes Id put down some money, Ill volunteer my truck for a template though.
#12
If you guys think 1st and 2nd gens can get away with the same headers, its something we can look into.
I'm not so sure we can make a set of 1 7/8" that will be able to fit both trucks. Tolerances seem too tight. What do you think?
I'm not so sure we can make a set of 1 7/8" that will be able to fit both trucks. Tolerances seem too tight. What do you think?
#14
Don't get caught up in 1st gen and 2nd gen stuff all being the same. I know first hand they are not. BRP hotrods made that same assumption and I bought a complete install kit from them I could not use. If you look on their site you will see listings for 1st gen and 2nd gen with different part numbers. They had to redo their line after disgruntled customers informed of their error. That's not to say you couldn't make one that could fit both, but you better have both present to test fit. There are also 2 or more commonly used motor mount kits to consider.
#16
Don't get caught up in 1st gen and 2nd gen stuff all being the same. I know first hand they are not. BRP hotrods made that same assumption and I bought a complete install kit from them I could not use. If you look on their site you will see listings for 1st gen and 2nd gen with different part numbers. They had to redo their line after disgruntled customers informed of their error. That's not to say you couldn't make one that could fit both, but you better have both present to test fit. There are also 2 or more commonly used motor mount kits to consider.
I'm hoping to make a perfect set for 2nd gens and then see if they are even close for 1st.
#18
We have em...just don't know if they will fit in the chassis. I will hang a set of our LS turbo headers on the truck when it gets here and add it to the notes.