Huge Transmission Sale, Steel Braided Brake Lines & more
#1
Thread Starter
FormerVendor
iTrader: (18)
Joined: Jan 2007
Posts: 587
Likes: 0
From: Lost Angels, CA
Huge Transmission Sale, Steel Braided Brake Lines & more
XTREME TRANSMISSIONS STREET/STRIP 4L60E UP TO 600 HP
New electronics, Hardened pump rings, Servo D ring kit instead of Teflon rings, New Accumulator Pistons, New Valve Body Spacer Plate, Modified Pump Assembly, Oversized Boost Valve, Transgo Hi-Rev Release Springs, High Quality Overhaul Kit, Frictions and Bushings, Transgo Shift kit, Borg Warner dual cage 29 element Input Sprag, Corvette 2nd gear Servo kit, Wide rear sun gear bushing, Heavy duty sun gear shell "The Beast", High Energy 2-4 Band High Energy 7 friction clutch pack with full thickness Kolene Steels, High RPM Transgo pump slide spring, Teflon Pump Bushing
Usually 1500.00
APF sale price 1325.00
XTREME TRANSMISSIONS PRO-STREET 4L60E /4L65E 600 + HP
New electronics, New Accumulator Pistons, Teflon Pump Bushing, New Valve Body Spacer Plate , Modified Pump Assembly, Oversized Boost Valve, Transgo Hi-Rev Release Springs, High Quality Overhaul Kit, Frictions and Bushings, Transgo Shift kit, Borg Warner dual cage 29 element Input Sprag , Sonnax 4th gear billet servo kit, Billet 2nd gear Servo kit, Wide rear sun gear bushing, Heavy duty sun gear shell "The Beast", Upgraded Bearing Type Reaction Carrier Shaft, Wide High Energy 2-4 Band, 4L65E 5 Pinion OEM Front and Rear Planetary Set, High Energy 7 friction clutch pack with full thickness Kolene Steels, Input drum Steel sleeve prevents input drum breakage at spline area, High RPM Transgo pump slide spring and pump rings.
Usually 1895.00
APF sale price 1675.00
flat rate SHIPPING COST $150.00
Techna-Fit Steel Braided Brake line kits
F-body w/ traction control
usually 150.00
APF sale price 115.00
F-body w/o traction control
usually 130.00
APF sale price 105.00
flat rate shipping 9.00
Trending Topics
#13
actually when they went to put it in they found out that my stock flexplate is cracked it 2 places by the started gear so I just ordered one from speed inc, should get here tomorrow
#15
Thread Starter
FormerVendor
iTrader: (18)
Joined: Jan 2007
Posts: 587
Likes: 0
From: Lost Angels, CA
Nice I was going to look at slipping a TBSS past the wife for her car but with no 3rd row of seats it wasn't really practical right now
#17
Thread Starter
FormerVendor
iTrader: (18)
Joined: Jan 2007
Posts: 587
Likes: 0
From: Lost Angels, CA
Ya the caliper covers are available now for Mustangs and the Corvette ones will be out in a few weeks, but they did not even consider us so I am sending calipers to them to have them made.
No we do not have a core buy back on the 4L60e's
No we do not have a core buy back on the 4L60e's
#19
On your "XTREME TRANSMISSIONS PRO-STREET 4L60E /4L65E 600 + HP", does that include the 4l70e as well..?
What is the max pwr/trq that this trans can handle..?
Is this a strait up purchase, no core swap...?
_
What is the max pwr/trq that this trans can handle..?
Is this a strait up purchase, no core swap...?
_
#20
You say "good to 600 horse". I may not have 600 horse, but I launch hard with 30x9 slicks and carry the front wheels past the 60 foot mark. Will your base "600 horse" tranny take this?